Setting SEP Codes for Reception

This section explains how to enter a SEP Code to request the destination to transmit a document.
You can receive a document stored in the destination's memory if the document has the same SEP Code as the SEP Code you entered.
You can enter numbers, *, #, and spaces.
Documents can be received from faxes that have Information Boxes.
This function enables the machine to receive documents from multiple destinations.
A SEP Code cannot be used with Internet Fax and e-mail.

1. Press [Fax] on the Home screen.
   

2. Place the original in the Auto Document Feeder (ADF) or on the exposure glass.
   Setting an Original to Send by Fax on the Scanner

3. Press [Settings] on the fax screen.

4. Press [SUB/SEP Code Settings].
   

5. Select [SEP Code Reception].
   

6. Configure the scan settings.
   Sending a Fax at the Image Quality Suitable for the Original

7. Specify the destination on the fax screen.
   

   • You can check the SEP code settings for the specified destination.

     1. After specifying the destination, press .
        

     2. Select the destination for which you want to confirm the settings for the SEP code.

     3. Press [Chk. SEP/SUB Code].

8. Press [Start].
   After scanning the originals, you can check and operate the originals waiting to be sent that are stored in the memory until the transmission is complete.
   Confirming and Handling a Document in the Fax Queue