List of Specifications for Standard Functions
Specifications for the Main Unit
Item | Specifications |
---|---|
Configuration | Console |
Memory | 4 GB (2 GB on the main unit and 2 GB on the control panel) |
Hard disk size | 320 GB |
Photosensitivity type | OPC drum |
Copy process | Laser dry electrostatic transfer system |
Exposure glass | Stationary original exposure type |
Scan method | Front side: One-dimensional solid scanning system using CMOS Back side: One-dimensional solid scanning system using CIS |
Warm-up time (23°C (73.4°F), rated voltage) |
|
First copy time |
*1 The first copy/print time may differ depending on the conditions and environment of the machine. |
Copy/print speed (per minute) |
(A4, 81/2 × 11, Paper Weight 2) |
Maximum original size | (mainly Europe and Asia) A3 (mainly North America) 11×17 |
Original scanning area |
|
Originals | Sheet, book, three-dimensional object |
Copy size |
|
Paper weight |
|
Missing image area (Copy) |
|
Preset reproduction ratio | (mainly Europe and Asia) Preset reproduction ratios (%):
(mainly North America) Preset reproduction ratios (%):
|
Reproduction ratio (zoom) | From 25–400% in increments of 1% |
Resolution (scanning originals) | 600 dpi: 8 bit |
Resolution (copying) | 1200 dpi: 1 bit |
Tone | 256 tones |
Paper capacity (80 g/m2, 20 lb. Bond) | |
Continuous copy run | 1–999 sheets |
Duplex | Standard |
Power requirements | (mainly Europe)
(mainly Asia) 220–240 V, 8.5 A, 50/60 Hz (mainly North America)
|
Power consumption (Main unit only) (mainly Europe and Asia) |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less |
Power consumption (Complete system) (mainly Europe and Asia) |
The complete system consists of the main unit, LCT, interposer, and Finisher SR4140. |
Power consumption (Main unit only) (mainly North America) |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less |
Power consumption (Complete system) (mainly North America) |
The complete system consists of the main unit, LCT, interposer, and Finisher SR4140. |
Dimensions | 690 × 883 × 1,161 mm (27.2 × 34.8 × 45.7 inches) |
Space for main unit (W × D) | 1,290 × 883 mm (50.8 × 34.8 inches) (including the bypass tray and copy tray) |
Noise emission (Sound power level: Main unit only) |
|
Noise emission (Sound power level: Complete system) |
|
Noise emission (Sound pressure level: Main unit only) |
|
Noise emission (Sound pressure level: Complete system) |
|
Noise emission |
|
Weight | Approx. 200 kg (440.9 lb.) or less |
Specifications for the Document Server
Item | Specifications |
---|---|
HDD (Document Server) | Approx. 94 GB Maximum: 10,000 pages (Total number of pages that can be stored with all functions combined.) Copy/A4 original: Approx. 10,000 pages Printer/A4/600 dpi, 2 bits: Approx. 10,000 pages Scanner/A4/200 dpi, 8 bits/JPEG: Approx. 10,000 pages (Under the printer and scanner modes, the number of the pages that can be stored depends on the print image and original.) |
Maximum number of stored documents | 3,000 documents |
Number of pages supported by memory sorting | Maximum: 3,000 pages Copy/A4 original: Approx. 3,000 pages Printer/A4/600 dpi, 4 bits: Approx. 3,000 pages (Under the printer mode, the number of pages that can be sorted depends on the print image.) |
After the documents have been stored up to the maximum, no more document can be stored. Delete unneeded documents.
Specifications for Facsimile
This function may not be used depending on the telephone line or area status.
To connect the machine to the network, use a LAN cable supporting 1000BASE-T, 100BASE-TX, and 10BASE-T. The length of the usable cable is up to 100 m.
Item | Specifications |
---|---|
Standard | G3 |
Resolution |
|
Transmission time | 3 seconds at 28,800 bps, Standard resolution (JBIG transmission: 2 seconds) |
Data compression method | MH, MR, MMR, JBIG*2 |
Maximum original size | Standard: A3 or 11 × 17 Custom (w × h): 297 × 1,200 mm (11.7 × 47.3 inches) |
Maximum scanning size | 297 × 1,200 mm (11.7 × 47.3 inches) |
Print process | Laser beam scanning and electro-photographic printing |
Transmission speed | 33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 / 19,200 / 16,800 / 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps (auto shift down system) |
*1 For Super Fine transmission, an expansion memory (optional) is required.
*2 JBIG transmission cannot be performed if the JBIG reception and ECM functions are not available on the destination fax. The ECM function is valid for communication over the G3 line.
Item | Specifications |
---|---|
Network |
|
Transmit function | |
Scan line density |
|
Original size: Scanning width | 297 mm (A3)*1, 257 mm (B4 JIS)*1, 210 mm (A4) |
Communication Protocols |
|
E-mail format | Single/Multi-part, MIME Conversion Attached file forms: TIFF-F (MH, MR*1, MMR*1 compression) |
Internet communication | Send and receive e-mail with a computer that has an e-mail address |
Encryption method (for forwarding) | S/MIME |
Internet Fax send functions: | Automatic conversion of sent documents to e-mail format and e-mail transmission. Memory transmission only. |
Internet Fax receive functions | Automatic detection and printing of appended TIFF-F (MH) files and ASCII text. Memory reception only. |
*1 Full mode
*2 For superfine-character transmission, an expansion memory (optional) is required.
Item | Specifications |
---|---|
Network |
|
Scan line density |
|
Maximum original size | Standard: A3 or 11 × 17 Custom (w × h): 297 × 1,200 mm (11.7 × 47.3 inches) |
Maximum scanning size | 297 × 1,200 mm (11.7 × 47.3 inches) |
Transmission protocol | Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC 3261 compliant), H.323 v2 |
Compatible machines | IP-Fax compatible machines |
IP-Fax transmission function | Specify an IP address and send faxes to an IP-Fax compatible fax through a network. Also capable of sending faxes to a G3 fax connected to a telephone line via a VoIP gateway. |
IP-Fax reception function | Receive faxes sent from an IP-Fax compatible fax through a network. Also capable of receiving faxes from a G3 fax connected to a telephone line via a VoIP gateway. |
*1 For detail-character and superfine-character transmission, an expansion memory (optional) is required.
Item | Specifications |
---|---|
Gateway (T.38 compliant) |
|
Gatekeeper |
|
SIP server |
|
You can assign multiple addresses of the machine in the IPv6 environment, but only one address can receive IP-fax.
The SIP connection is specified to connect to either IPv4 or IPv6 depending on the environment of the machine. To change the setting, contact your local dealer.
Item | Specifications |
---|---|
Network |
|
Scan line density |
|
Maximum original size | Standard: A3 or 11 × 17 Custom (w × h): 297 × 1,200 mm (11.7 × 47.3 inches) |
Maximum scanning size (w × h) | 297 × 1,200 mm (11.7 × 47.3 inches) |
E-mail transmission protocols | SMTP, TCP/IP |
Protocols for sending files to folders | SMB, FTP, TCP/IP |
E-mail format | Single/Multi-part, MIME Conversion |
File formats | TIFF (MH, MR, MMR compression), PDF, PDF/A When you select PDF or PDF/A for the file format, you can attach a digital signature. |
Authentication methods | SMTP-AUTH, POP before SMTP, A-POP |
Encryption method | S/MIME |
E-mail sending functions | Automatically converts documents to e-mail format and sends them as e-mail. |
Sending to folder functions | Sends scanned files over the network to shared folders or FTP server folders. |
*1 When you send documents in TIFF format.
*2 For detail-character and superfine-character transmission, an expansion memory (optional) is required.
Item | Specifications |
---|---|
Network |
|
E-mail reception protocols (Mail to Print) | POP3, SMTP, IMAP4, TCP/IP |
E-mail format | Single/Multi-part, MIME Conversion |
File formats (Mail to Print) | JPEG (JFIF), PDF |
Authentication methods | SMTP-AUTH, POP before SMTP, A-POP |
Encryption method | S/MIME |
E-mail receiving functions | Automatically detects and outputs JPEG and PDF documents attached to received e-mail. |
Specifications for Printer
To connect the machine to the network, use a LAN cable supporting 1000BASE-T, 100BASE-TX, and 10BASE-T. The length of the usable cable is up to 100 m.
Item | Specifications |
---|---|
Printing speed |
(A4, 81/2 × 11, plain paper, one-side printing) |
Resolution | 200 dpi, 300 dpi, 400 dpi, 600 dpi, 1,200 dpi |
Printer language |
|
Interface |
|
Network protocol | TCP/IP (IPv4, IPv6) |
USB interface |
|
Operating system |
|
Fonts |
|
Store function | Total number of documents that can be stored: Up to 3,000 documents Number of pages for each document that can be stored: Up to 3,000 pages Total number of pages of all documents that can be stored: Up to 10,000 pages |
The maximum length for the cable connecting the machine to an Ethernet network is 100 meters.
When the resolution is 1200 dpi, print speed may be slower.
Specifications for Scanner
To connect the machine to the network, use a LAN cable supporting 1000BASE-T, 100BASE-TX, and 10BASE-T. The length of the usable cable is up to 100 m.
Item | Specifications |
---|---|
Type | Full-color scanner |
Scan method | Flatbed scanning |
Image sensor type | Front side: CMOS Image Sensor Back side: Color CIS |
Scan type | Sheet, book, three-dimensional object |
Original sizes that can be scanned |
|
Scan sizes automatically detectable from the exposure glass | (mainly Europe and Asia) A3, A4, A5, B4 JIS, B5 JIS (mainly North America) 11 × 17, 81/2 × 14, 81/2 × 132/5, 81/2 × 11, 51/2 × 81/2 |
Scan sizes automatically detectable from the ADF | (mainly Europe and Asia) A3, A4, A5, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 11 (mainly North America) A3, A4, 11 × 17, 81/2 × 14, 81/2 × 132/5, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 10 × 14 |
Scan speed (the machine equipped with the one-pass duplex scanning ADF): |
When using the E-mail, Scan to Folder, WSD (Push Type), or Scan to Removable device (Original size: A4/81/2 × 11, Resolution: 300 dpi)
Scanning speed differs depending on the operating environment of the machine and computer, scan settings, and the content of originals. |
Tone |
|
Basic scanning resolution: | 200 dpi |
Image compression type for black and white (two-value) | TIFF (MH, MR, MMR, JBIG2) |
Image compression type for gray scale/full color | JPEG |
Interface |
|
Network protocol | TCP/IP |
WSD | Supported |
DSM | Supported*1 |
*1 The function can be used only in Scanner (Classic).
Item | Specifications |
---|---|
Scanning resolution | 100 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi |
Protocol*1 | SMTP*2, POP*3, IMAP4*3 |
Output format | TIFF, JPEG, PDF, High Compression PDF, PDF/A, Searchable PDF*4*5 |
*1 Supporting Web mail transmission
*2 Supporting SMTP over SSL
*3 Supporting POP/IMAP4 over SSL.
*4 To perform OCR, the optional OCR unit is required.
*5 The number of characters that can be scanned optically is about 40,000 characters per page.
When you select [PDF], [High Compression PDF], or [PDF/A] for the file format, you can attach a digital signature. You can also specify the security settings for [PDF] or [High Compression PDF].
Scanning an Original as a PDF with Security Setting Specified
To specify High Compression PDF for the PDF type, the following settings are required:
Selecting Gray Scale or Full Color for [Original Type] under [Send Settings]
Selecting other than [Reduce / Enlarge] under [Send Settings]
Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Send Settings]
Selecting other than [Preview]
Specifying [PDF File Type: PDF/A Fixed] under [System Settings] to [Off]
Item | Specifications |
---|---|
Scanning resolution | 100 dpi, 200 dpi, 300 dpi, 400 dpi, 600 dpi |
Protocol | SMB, FTP |
Output format | TIFF, JPEG, PDF, High Compression PDF, PDF/A, Searchable PDF*1*2 |
*1 To perform OCR, the optional OCR unit is required.
*2 The number of characters that can be scanned optically is about 40,000 characters per page.
When you select [PDF], [High Compression PDF], or [PDF/A] for the file format, you can attach a digital signature. You can also specify the security settings for [PDF] or [High Compression PDF].
Scanning an Original as a PDF with Security Setting Specified
To specify High Compression PDF for the PDF type, the following settings are required:
Selecting Gray Scale or Full Color for [Original Type] under [Transmission Settings]
Selecting other than [Reduce / Enlarge] under [Transmission Settings]
Selecting [200 dpi], [300 dpi], [400 dpi], or [600 dpi] for [Resolution] under [Transmission Settings]
Selecting other than [Preview]
Specifying [PDF File Type: PDF/A Fixed] under [System Settings] to [Off]
Item | Specifications |
---|---|
Scanning resolution | 100–1,200 dpi*1 |
Protocol | TCP/IP |
Operating system |
(TWAIN scanner runs in 32-bit compatible mode on a 64-bit operating system, so TWAIN scanner is not compatible with 64-bit applications. Use 32-bit applications. IC card Authentication System is not compatible with 64-bit operating system.) |
*1 The maximum resolution depends on the scan size.
Item | Specifications |
---|---|
Scanning resolution (Main scanning × Sub-scanning) | 100–1,200 dpi*1 |
Protocol | TCP/IP |
Operating system |
(WIA scanner can function under both 32- and 64-bit operating systems.) |
*1 The maximum resolution depends on the scan size.
Specifications for Auto Document Feeder
Item | Specifications |
---|---|
Mode | Batch mode, SADF mode, Mixed Sizes mode, Custom Size originals mode, Original Orientation mode |
Original size | (mainly Europe and Asia) A3–A5, B4 JIS–B6 JIS, 11 × 17–81/2 × 11
(mainly North America) 11 × 17–51/2 × 81/2, A3–A4 |
Original weight | One-sided: 40-128 g/m2 (11-34 lb. Bond) Two-sided: 52-128 g/m2 (14-34 lb. Bond)
|
Number of originals to be set | 220 sheets (80 g/m2, 20 lb. Bond)
|
Specifications for Finisher SR4140
Item | Specifications |
---|---|
Paper size for the finisher upper tray |
|
Paper weight for the finisher upper tray |
|
Stack capacity for the finisher upper tray (80 g/m2, 20 lb. Bond) |
|
Paper size for the finisher shift tray |
|
Paper weight for the finisher shift tray |
|
Paper sizes that can be shifted when delivered to the finisher shift tray | A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight that can be shifted when delivered to the finisher shift tray | 52.0–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
Stack capacity for the finisher shift tray (80 g/m2, 20 lb. Bond) |
|
Staple paper size |
|
Staple paper weight | 64.0–80.0 g/m2 (17.1–21.3 lb. Bond) When not using Z-fold, you can use two sheets of paper weighing up to 200.0 g/m2 (110.7 lb. Cover) per set as cover sheets. |
Staple capacity (80 g/m2, 20 lb. Bond) |
|
Stack capacity after stapling (80 g/m2, 20 lb. Bond) |
|
Staple position | 5 positions (Top 1, Bottom 1, Slant, Left 2, Top 2) |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 100 W or less |
Dimensions (W × D × H) | 806 × 730 × 980 mm (31.8 × 28.8 × 38.6 inches) |
Weight | Approx. 75 kg (165.4 lb.) |
Specifications for Finisher SR4150
Item | Specifications |
---|---|
Paper size for the finisher upper tray | A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 51/2 × 81/2, 71/4 × 101/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight for the finisher upper tray | 52.0–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) |
Stack capacity for the finisher upper tray (80 g/m2, 20 lb. Bond) |
When using paper that has a horizontal length of 487.8–600.0 mm (19.21–23.63 inches), remove output sheets one by one from the tray. |
Paper size for the finisher shift tray | A3, A4, A5, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight for the finisher shift tray | 52.0–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
Paper sizes that can be shifted when delivered to the finisher shift tray | A3, A4, A5, B4, B5, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight that can be shifted when delivered to the finisher shift tray | 52.0–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
Stack capacity for the finisher shift tray (80 g/m2, 20 lb. Bond) |
|
Staple paper size | A3, A4, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14 , 81/2 × 13 , 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14 , 81/2 × 132/5, 81/2 × 131/2, custom size |
Staple paper weight | 52.0–105.0 g/m2 (14.0–28.0 lb. Bond) You can use two sheets of paper weighing up to 256 g/m2 (141 lb. Index) per set as cover sheets. |
Staple capacity (80 g/m2, 20 lb. Bond) | 65 sheets |
Stack capacity after stapling (80 g/m2, 20 lb. Bond) |
|
Staple position | Top 1, Bottom 1, Slant, Bottom Slant, Left 2, Top 2 |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 67 W or less |
Dimensions (W × D × H) | 657 × 730 × 980 mm (25.9 × 28.8 × 38.6 inches) (Except protruding parts) |
Weight |
|
Specifications for Booklet Finisher SR4160
Item | Specifications |
---|---|
Paper size for the finisher upper tray | A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 51/2 × 81/2, 71/4 × 101/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight for the finisher upper tray | 52.0–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) |
Stack capacity for the finisher upper tray (80 g/m2, 20 lb. Bond) |
When using paper that has a horizontal length of 487.8–600.0 mm (19.21–23.63 inches), remove output sheets one by one from the tray. |
Paper size for the finisher shift tray | A3, A4, A5, B4, B5, B6, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight for the finisher shift tray | 52.0–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
Paper sizes that can be shifted when delivered to the finisher shift tray | A3, A4, A5, B4, B5, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight that can be shifted when delivered to the finisher shift tray | 52.0–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
Stack capacity for the finisher shift tray (80 g/m2, 20 lb. Bond) |
|
Staple paper size | A3, A4, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14 , 81/2 × 13 , 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14 , 81/2 × 132/5, 81/2 × 131/2, custom size |
Staple paper weight | 52.0–105.0 g/m2 (14.0–28.0 lb. Bond) You can use two sheets of paper weighing up to 256 g/m2 (141 lb. Index) per set as cover sheets. |
Staple capacity (80 g/m2, 20 lb. Bond) | 65 sheets |
Stack capacity after stapling (80 g/m2, 20 lb. Bond) |
|
Staple position | Top 1, Bottom 1, Slant, Bottom Slant, Left 2, Top 2 |
Saddle stitch paper size | A3, A4, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 11, 81/4 × 14, 81/4 × 13, 11 × 15, 11 × 14, 10 × 15, 10 × 14 |
Saddle stitch paper weight |
You can use a sheet of paper weighing up to 216.0 g/m2 (79.9 lb. Cover) per set as a cover sheet. |
Saddle stitch capacity (80 g/m2, 20 lb. Bond) |
|
Stack capacity after saddle stitching (80 g/m2, 20 lb. Bond) |
|
Saddle stitch position | Center 2 positions |
Types of folds | Half Fold |
Half fold paper size | A3, A4, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 11, 81/4 × 14, 81/4 × 13, 11 × 15, 11 × 14, 10 × 15, 10 × 14 |
Half fold Paper weight |
|
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 67 W or less |
Dimensions (W × D × H) | 657 × 730 × 980 mm (25.9 × 28.8 × 38.6 inches) (Except protruding parts) |
Weight |
|
Specifications for Copy Tray
Item | Specifications |
---|---|
Paper size | A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 51/2 × 81/2, 71/4 × 101/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper weight | 52.3–360.0 g/m2 (14.0 lb. Bond–198.0 lb. Index) |
Paper capacity (80 g/m2, 20 lb. Bond) | 500 sheets: A4, 81/2×11 250 sheets: B5 or smaller, B4, 81/2×14 or larger |
Dimensions (W × D × H) | 400×350×381 mm (15.7 × 14.0 × 15.0 inches) |
Weight | Approx. 3 kg (6.6 lb.) |
Specifications for Shift Tray (Shift Sort Tray SH4020)
Item | Specifications |
---|---|
Paper size | A3, A4, A5, A6, B4, B5, B6, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2, custom size |
Paper capacity (80 g/m2, 20 lb. Bond) | 1,250 sheets: A4, B5, 81/2 × 11 500 sheets: A3, B4, A5, 11 × 17, 81/2 × 14, 12 × 18 100 sheets: A5, B6, A6, 51/2 × 81/2 |
Paper weight | 52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) |
Paper sizes that can be shifted | A3, A4, A5, B4, B5, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 71/4 × 101/2, 51/2 × 81/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2 |
Paper weight that can be shifted | 52.3–216.0 g/m2 (14.0 lb. Bond–79.9 lb. Cover) |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 20 W or less |
Dimensions (W × D × H) | 400×600×480 mm (15.7 × 23.6 × 18.9 inches) |
Weight Approx. | 11 kg (24.0 lb.) |
Specifications for Punch Unit (Finisher SR4140)
Punch unit type | Paper size | Paper weight |
---|---|---|
2 & 4 holes type: 2 holes | : A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, custom size | 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
2 & 4 holes type: 2 holes | : A4, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 16K, custom size | |
2 & 4 holes type: 4 holes | : A3, B4 JIS, 11 × 17, 8K, 12 × 18, 11 × 15, 11 × 14, custom size | |
2 & 4 holes type: 4 holes | : A4, B5 JIS, 81/2 × 11,71/4 × 101/2, 16K, custom size | |
4 holes type: 4 holes | : A3, A4, A5, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, custom size | 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
4 holes type: 4 holes | : A4, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 16K, custom size | |
2 & 3 holes type: 2 holes | : A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, custom size | 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index) |
2 & 3 holes type: 2 holes | : A4, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 16K, custom size | |
2 & 3 holes type: 3 holes | : A3, B4 JIS, 11 × 17, 8K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, custom size | |
2 & 3 holes type: 3 holes | : A4, B5 JIS, 81/2 × 11,71/4 × 101/2, 16K, custom size |
Specifications for Punch Unit (Finisher SR4150, Booklet Finisher SR4160)
Punch unit type | Paper size | Paper weight |
---|---|---|
2 & 4 holes type: 2 holes | : A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, SRA4, 81/2 × 132/5, custom size | 52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) |
2 & 4 holes type: 2 holes | : A4, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 16K, custom size | |
2 & 4 holes type: 4 holes | : A3, B4 JIS, 11 × 17, 11 × 15, 11 × 14, 8K, custom size | |
2 & 4 holes type: 4 holes | : A4, B5 JIS, 81/2 × 11,71/4 × 101/2, 16K, custom size | |
4 holes type: 4 holes | : A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, SRA4, 81/2 × 132/5,custom size | 52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) |
4 holes type: 4 holes | : A4, A5, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2,16K, custom size | |
2 & 3 holes type: 2 holes | : A3, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, SRA4, 81/2 × 132/5, custom size | 52.3–256.0 g/m2 (14.0 lb. Bond–141.0 lb. Index) |
2 & 3 holes type: 2 holes | : A4, B5 JIS, 81/2 × 11, 71/4 × 101/2, 51/2 × 81/2, 16K, custom size | |
2 & 3 holes type: 3 holes | : A3, B4 JIS, 11 × 17, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 8K, custom size | |
2 & 3 holes type: 3 holes | : A4, B5 JIS, 81/2 × 11,71/4 × 101/2, 16K, custom size |
Specifications for Interposer
Item | Specifications |
---|---|
Paper size | |
Paper capacity | |
Paper weight | |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 43 W or less |
Dimensions (W × D × H) | 500 × 600 × 600 mm (19.7 × 23.7 ×23.7 inches) |
Weight | Approx. 12 kg (26.5 lb.) |
Specifications for Mailbox
Item | Specifications |
---|---|
Number of trays | 9 trays |
Paper size | A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 101/2, 8 × 10, 51/2 × 81/2, 71/4 × 101/2, 182 × 210 mm, 170 × 210 mm, 210 × 340 mm, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5, 81/2 × 131/2 |
Paper weight | 60.0–128.0 g/m2 (16.1 lb. Bond–47.3 lb. Cover) |
Paper capacity (80 g/m2, 20 lb. Bond) | 100 sheets per tray |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 30 W or less |
Dimensions (W × D × H) | 540 × 600 × 660 mm (21.3 × 23.7 × 26.0 inches) |
Weight | Approx. 15 kg (33.1 lb.) |
Specifications for Multi-Folding Unit FD4010
Item | Specifications |
---|---|
Paper size |
|
Paper weight |
|
Power requirements |
(A separate power source is required.) |
Maximum power consumption | 60 W or less |
Dimensions (W × D × H) | 209 × 730 × 980 mm (8.2 × 28.8 × 38.6 inches) (Except protruding parts) |
Weight | 45 kg (99.2 lb.) or less |
Specifications for Multi-Folding Unit FD4020
Item | Specifications |
---|---|
Paper size |
|
Paper weight |
|
Power requirements |
(A separate power source is required.) |
Maximum power consumption | 240 W or less |
Dimensions (W × D × H) | 470 × 730 × 980 mm (18.6 × 28.8 × 38.6 inches) |
Weight | Approx. 92 kg (202.9 lb.) |
The Multi-sheet Fold function can fold a maximum of three sheets at a time.
Wrinkling can occur when applying letter fold-in, letter fold-out, or gate fold to B4 JIS, A3, 81/2 × 14, 11 × 17, 8K, 12×18, 81/2×132/5, or larger sheets. In some cases, you may have to use A4 sheets or smaller when applying folds in combination with the reduction function.
Specifications for Output Jogger
Item | Specifications |
---|---|
Paper size | A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 11, 51/2 × 81/2, 12 × 18, 13 × 191/5 |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 15 W or less |
Dimensions (W × D × H) | 169 × 539 × 203 mm (6.7 × 21.3 × 8.0 inches) |
Weight | Approx. 2 kg (4.4 lb.) |
Specifications for Large Capacity Tray (LCT)
Item | Specifications |
---|---|
Page size | |
Paper capacity | |
Paper weight | |
Power requirements | Power is supplied from the main unit. |
Maximum power consumption | 50 W or less |
Dimensions (W × D × H) | 352 × 540 × 625 mm (13.9 × 21.3 × 24.7 inches) |
Weight | Approx. 22 kg (48.6 lb.) |
If you want to load custom size paper, contact your service representative.
Specifications for IEEE 1284 Interface Board
Item | Specifications |
---|---|
Transmission spec | IEEE 1284 |
Required cable | Standard IEEE 1284 compliant Micro Centronics 36 pin cable |
Specifications for Wireless LAN Board
Note that the available channels (frequency ranges) and locations to use the wireless LAN are subject to the regulations of the country or region where the printer is used. Be sure to use the wireless LAN according to the applicable regulations.
Item | Specifications |
---|---|
Transmission spec | Based on IEEE 802.11a/b/g/n (wireless LAN) |
Protocol | TCP/IP |
Transmission rate | 2.4 GHz band: 1–130 Mbps |
Frequency range (Center Frequency) | 2412–2472 MHz (1–13 channels) |
Transmission mode |
|
Web Image Monitor is supported.
The transmission rates of 130 Mbps in the 2.4 GHz band is the theoretical values of the wireless LAN specification. The actual transmission rate may be lower, depending on the operating environment.
Channels other than 1–11 cannot be used because of the specifications and the configuration of the access point.
The channel in use might differ depending on the country.
Specifications for Device Server Option
Item | Specifications |
---|---|
Interface |
|
Operating systems |
|
Protocol |
|