User GuideIM 7000/8000/9000

Machine Options

Guide to Functions of the Machine’s External Options

(1) Options Mounted to the Machine’s Top Section

No.

Option

Description

1

ADF double-feed detection kit

Detects a double feeding of the original when it is placed in the ADF.

2

Small size paper unit

Used to scan an original smaller than B6 JISLandscape size with the one- pass duplex scanning ADF.

3

Card reader

Pass an IC card over the card reader to log in to the machine.

Logging In from the Control Panel

(2) Options Mounted to the Machine’s Right Side Section

No.

Option

Description

1

Large capacity tray (LCT)

Holds up to 4,000 sheets of paper.

2

Extension unit of LCT

Attached to the LCT and holds 2,500 sheets of B4 JISLandscape, A4Landscape, 81/2 × 14Landscape, or 81/2 × 11Landscape paper.

(3) Options Mounted to the Machine’s Left Side Section 1

No.

Option

Description

1

Copy tray

If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

2

Multi-Folding Unit FD4010

The folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, and Z-fold.

3

Multi-Folding Unit FD4020

The folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.

4

Shift tray

Trays that support collating by set.

(3) Options Mounted to the Machine’s Left Side Section 2

No.

Option

Description

1

Output jogger

Jogs the sheets delivered to the finisher shift tray.

2

Booklet Finisher SR4160

Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

  • Finisher upper tray

  • Finisher shift tray

  • Finisher booklet tray

Copies can be punched if the optional punch unit is installed on the finisher.

3

Finisher SR4150

Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

  • Finisher upper tray

  • Finisher shift tray

Copies can be punched if the optional punch unit is installed on the finisher.

4

Mailbox

Sorts printed paper. For Finisher SR4150 or Booklet Finisher ST4160. Consists of mailbox output trays 1–9.

5

Interposer

Inserts cover or slip sheets into copied or printed paper.

(3) Options Mounted to the Machine’s Left Side Section 3

No.

Option

Description

1

Finisher SR4140

Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

  • Finisher upper tray

  • Finisher shift tray

Copies can be punched if the optional punch unit is installed on the finisher.

(5) Other Options

No.

Option

Description

1

A3/11 × 17 tray unit

You can load paper sizes up to A3Landscape or 11 × 17Landscape in Tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

2

Copy connector

Allows you to use the connect copy function.

Note

  • You cannot install multiple finishers simultaneously.

  • To use the folding unit, Finisher SR4150, Booklet Finisher SR4160, or Finisher SR4140 is required.

  • To use the interposer, Finisher SR4150, Booklet Finisher SR4160, or Finisher SR4140 is required.

  • To use the output jogger, Finisher SR4150 or Booklet Finisher SR4160 is required.

  • To use the mailbox, Finisher SR4150 or Booklet Finisher SR4160 is required.

Guide to Functions of the Machine’s Internal Options

  • Fax unit

    Allows you to use the facsimile function.

  • Extra G3 interface unit

    This lets you add a G3 fax line. A maximum of two G3 interface units can be installed.

  • Expansion memory

    Provides 60 MB of additional memory for the facsimile function. (Standard 4 MB)

    This allows you to send and receive fax documents at high resolution (Super Fine), and also to receive fax documents at high resolution (Fine). This enables you to increase the number of sheets of originals that can be stored in memory.

  • PostScript 3 unit

    Allows you to output using Genuine Adobe PostScript 3.

  • OCR unit

    Recognizes the scanned originals optically, and creates a PDF with the text data embedded.

  • IPDS unit

    Allows you to print using Intelligent Printer Data Stream (IPDS).

  • XPS card (Region A icon (mainly Asia)/Region B icon (mainly North America))

    Allows you to directly output XPS files.

  • Device server option

    Allows you to add an Ethernet port to the printer. Allows you to print using the printer function via a network other than that connected to the machine.

  • IEEE 1284 interface board

    Allows you to connect to an IEEE 1284 cable.

  • Wireless LAN board

    Allows you to communicate over wireless LAN.

  • File format converter

    Allows you to download documents that are stored in the Document Server to the computer.

  • Data overwrite security unit

    Allows you to erase and overwrite the existing data in the machine.

  • Enhanced Security HDD (Region A icon(mainly Europe)/ Region B icon (mainly North America))

    Allows you to enhance the security of the hard disk by using an encryption function that is compliant with FIPS 140-2.

  • Fax connection unit

    Allows you to send and receive faxes via a different machine that has the fax unit installed.

  • VM card

    Allows you to install applications compatible with the "Embedded Software Architecture" platform.

    To expand the function of this machine, various applications written in Java language can be added.

Note

  • Only one of the following can be installed: IEEE 1284 interface board, wireless LAN board, file format converter, or device server option.

  • Only one of the following options can be installed on the machine at any one time: HDD and Enhanced Security HDD (Region A icon(mainly Europe)/ Region B icon (mainly North America)).

  • The Ethernet interface and wireless LAN board cannot be used simultaneously.