System

Print Error Report

You can specify whether to have an error report printed when a printer or memory error occurs.

Auto Continue

When the paper specified on the printer driver is not set in the machine, you can specify whether the machine continues to print onto paper that has not been specified after a system error occurs (Forced Printing).

When you specify [Immediate], forced printing starts. You can display the dialog for confirming whether to continue printing and specify to wait for a specified period of time (1 to 15 minutes).

Depending on the machine settings, printing is canceled, and Forced Printing does not start. The results of Forced Printing cannot be guaranteed.

Store and Skip Errored Job

You can specify whether to store an error job in the machine and to print the next job. Normal Print, Sample Print, and Stored Print jobs can be stored in the machine when an error occurs. To activate this setting, specify the number of pages of the error job that the machine verifies when printing starts (1 to 999 pages). A large number of pages require time to start printing. If an error occurs after printing starts, the next job will not be printed.

Memory Overflow

When the sent data size is too large to process in the machine, you can specify whether to stop printing at the error page (Do not Print) or to continue printing.

To continue printing, release the Staple and Sort functions, and print the error information last.

Error Display Setting

You can specify whether to display all print errors on the control panel. When you specify [Only Important Ones], some print errors are displayed.

Auto Cancel Confirmation for PDL Error Job

This is the setting item to specify when you specify [Auto Cancel for Print Job(s) on Error] to [On]. You can specify whether to display the screen to confirm auto cancelation of the error job on the control panel. The next job does not start until the screen disappears.

Auto Cancel for Print Job(s) on Error

When a print error occurs, you can specify whether to automatically cancel printing of the error job and the job received just before the error occurred.

When Exceeded Max. Number of Sheets for Stapling

When Exceeded Max. Number of Sheets for Booklet

You can specify the machine's behavior when the number of pages in a document exceeds the maximum number of pages that can be stapled together.

Specify [Continue Printing] to cancel Stapling when the number of pages in the document to print exceeds the

maximum number that can be stapled.

Default:

Sub Paper Size

You can specify whether A4 and 8¹/₂ × 11 paper is treated as the same size.

Letterhead Setting

To print onto paper that has a fixed print side or print direction (letterhead paper, for example), make the settings for image rotation and print side correctly. Set the paper so that the paper orientation and print side are placed correctly.

Loading Orientation-fixed Paper or Two-sided Paper

Tray Setting Priority

Paper Confirmation for Bypass Tray

Specify whether to display the confirming screen of the paper size, type, and feed direction on the control panel when feeding paper from the bypass tray. If [Display] is specified, you can check the print settings for the bypass tray before printing starts.

This setting is available when Bypass Tray is set to [Driver/Command].

Tray Setting Priority

(Continued)

Paper Mismatch Alert for Bypass Tray

Specify whether to display an alert on the control panel when the bypass tray is specified as the paper source and the paper size or type does not match the specified one or no paper is loaded in the bypass tray.

This setting is available when Bypass Tray is set to [Machine Setting(s)] or [Machine Setting(s): Any Type].

Tray Setting Priority

(Continued)

Bypass Tray

Tray 1

Tray 2

Tray 3

LCT

You can specify whether to give priority to the settings specified by the printer driver or the print command, or to the ones specified on the control panel for each tray when the machine receives print data. Only the trays attached to the machine appear.

For the bypass tray, you can specify of the following settings. For the trays 1 to 3 or Large Capacity Tray, you can specify either [Driver/Command] or [Machine Setting(s)].

Tray Setting Priority

(Continued)

Tray Setting Priority

(Continued)

Tray Switching

This is the setting item to specify when you print by specifying the tray on the printer driver. You can specify whether to switch to Auto Paper Select when the paper set in the tray is different from the settings specified on the printer driver. If the same paper is set on another tray, the paper is fed from the tray.

Extended Auto Tray Switching

This is the setting item to specify when you print by specifying the paper tray. You can specify whether to use the same paper set on another tray when the paper set in the designated tray runs out.

If Auto Tray Switching for Print Settings of emulation is disabled, printing continues by Auto Tray Switching.

Job Separation

Specify whether to shift the position of ejected sheets for each job alternately. You can sort the output sheets per job automatically when printing a large number of sheets from multiple jobs.

This menu item can be selected only when an optional finisher or internal shift tray is installed.

Rotate Sort: Auto Paper Continue

You can specify whether to continue printing when Rotate Sort is specified and the paper tray runs out of paper that is loaded in the landscape or portrait orientation.

Rotate by 180 Degrees

You can specify when you rotate the print image 180 degrees relative to the paper orientation. Use this function to print onto paper whose orientation is fixed such as a letterhead or envelope.

Printer Language

Specify the printer language.

Default Printer Language

You can specify the printer language to be used when the machine fails to detect the printer language.

Print Compressed Data

You can specify whether to uncompress and extract job data compressed in the GZIP format before printing.

Copies

You can specify the number of copies when printing without using the printer driver.

Spool Image

You can select to print spool images. The print job transmitted from the computer is temporarily stored on the machine's hard disk as bitmap images that can be printed when transmission is complete. If more than one print job is transmitted, a spool image is printed for each.

2 Sided Print

You can select to have print on both sides of each page.

Blank Page Print

You can specify whether or not to print blank pages.

Pages that match one of the following conditions are identified as blank.

Page Size

You can select the default paper size.

(mainly Europe and Asia)

(mainly North America)

Edge to Edge Print

You can specify whether to remove trailing, top, or bottom margins when printing a document.

Reserved Job Waiting Time

You can specify how long the machine waits to receive a print job before allowing other functions to interrupt it.

Edge Smoothing

You can specify whether to apply smoothing when printing.

Toner Saving

You can specify whether to reduce toner consumption when printing.

Memory Usage

You can select the type of process to allocate the memory preferentially from the user memory to improve processing of foreign letters and fonts (Font Priority), or the page memory to increase the printing speed (Frame Priority).