User GuideIM 7000/8000/9000

Finishing

This section describes the settings in [Finishing] under [Copier / Document Server Settings].

How to Use the "Settings"

Sort

Setting Items

Description

Rotate Sort: Auto Paper Continue

You can specify whether the machine continues copying using the paper set in another paper tray when paper of the required orientation runs out during rotate sort.

  • Default: [Off]

Memory Full Auto Scan Restart

When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals.

When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning.

When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately.

  • Default: [Off]

Staple

Setting Items

Description

Staple Position

(This setting item is enabled only when [Copier (Classic)] is used.)

You can specify which staple-type key is displayed on the initial screen of the Copier function. You can specify up to four staple types. The types of staple differ depending on the finisher attached.

Stapling Copied Pages

Punch

Setting Items

Description

Punch Type

(This item is enabled only when the [Copier (Classic)] is used.)

You can specify which punch-type key is displayed on the initial screen of the Copy function.

When 2 & 4 hole punch unit is installed:

  • Default for Punch Type 1: [Punch: 2 Holes Left]

  • Default for Punch Type 2: [Punch: 2 Holes Top]

When 2 & 3 hole punch unit is installed:

  • Default for Punch Type 1: [Punch: 3 Holes Left]

  • Default for Punch Type 2: [Punch: 3 Holes Top]

When 4 hole punch unit is installed:

  • Default for Punch Type 1: [Punch: 4 Holes Left]

  • Default for Punch Type 2: [Punch: 4 Holes Top]

Punching Holes on the Copied Pages

Fold

Depending on the folding unit mounted on the machine, some settings are not displayed.

Setting Items

Description

Half Fold Settings (Finisher: Booklet Tray)

Specify each settings of half fold.

  • Default

    • Print Side: [Inside]

    • Multi-sheet Fold: [Off]

Z-fold Output Tray

You can specify the tray to which Z-fold paper is delivered.

When Multi-Folding Unit FD4010 is installed:

  • Default: [Finisher Upper Tray]

When Multi-Folding Unit FD4020 is installed:

  • Default: [Folding Unit Tray]

Half Fold

Specify the fold orientation and print side for half fold.

  • Default

    • Fold Orientation: [Right - Left]

    • Print Side: [Inside]

    • Multi-sheet Fold: [Off]

Folding Copied Sheets

Letter Fold-out

You can specify the fold and page opening direction for Letter Fold-out.

  • Default

    • Fold Orientation: [Right - Left]

    • Open Orientation: [Open to Right]

    • Multi-sheet Fold: [Off]

Folding Copied Sheets

Letter Fold-in

You can specify the fold and page opening direction and print side for Letter Fold-in.

  • Default

    • Fold Orientation: [Right - Left]

    • Open Orientation: [Open to Right]

    • Print Side: [Inside]

    • Multi-sheet Fold: [Off]

Folding Copied Sheets

Double Parallel Fold

Specify each settings of double parallel fold.

  • Default

    • Fold Orientation: [Right - Left]

    • Open Orientation: [Open to Right]

    • Print Side: [Inside]

Folding Copied Sheets

Gate Fold

Specify each settings of gate fold.

  • Default

    • Fold Orientation: [Right - Left]

    • Print Side: [Inside]

Folding Copied Sheets

Paper Output

Setting Items

Description

Copy Back Cover

When one-sided copying, you can specify whether to have the back cover outside (outside page) or inside (inside page).

  • Default: [Outside]

Copy Eject Face Method in Glass Mode

You can select the way in which copies are delivered when copying an original placed on the exposure glass.

  • Default: [Face Up]

Copy Eject Face Method in Bypass Mode

You can select the way in which copies are delivered when copying from the bypass tray.

  • Default: [Face Up]