Settings for Administrator

This section describes the settings in [Settings for Administrator] under [System Settings].

Security Pattern/Stamp

Setting Items	Description
Detect Data Security for Copying	Specify whether to display in gray tone when scanning the original with the data security for copying in the Copier or Scanner function or storing it in the Document Server. Default: [Off]
Unauthorized Copy Prevention Printing: Copier Unauthorized Copy Prevention Printing: Document Server Unauthorized Copy Prevention Printing: Printer	Specify whether to use the Data Security for Copying or Unauthorized Copy Prevention for Pattern for each function when printing on the machine. Specifying the Unauthorized Copy Prevention Function
Compulsory Security Stamp: Copier Compulsory Security Stamp: Document Server Compulsory Security Stamp: Fax Compulsory Security Stamp: Printer	Specify whether to print the user and device information for each function when a file is output using the Copier, Document Server, Fax, or Printer function. Default: [Off] Specifying the Compulsory Security Stamp Function

Setting Items

Description

Detect Data Security for Copying

Specify whether to display in gray tone when scanning the original with the data security for copying in the Copier or Scanner function or storing it in the Document Server.

Default: [Off]

Unauthorized Copy Prevention Printing: Copier

Unauthorized Copy Prevention Printing: Document Server

Unauthorized Copy Prevention Printing: Printer

Specify whether to use the Data Security for Copying or Unauthorized Copy Prevention for Pattern for each function when printing on the machine.

Specifying the Unauthorized Copy Prevention Function

Compulsory Security Stamp: Copier

Compulsory Security Stamp: Document Server

Compulsory Security Stamp: Fax

Compulsory Security Stamp: Printer

Specify whether to print the user and device information for each function when a file is output using the Copier, Document Server, Fax, or Printer function.

Default: [Off]

Specifying the Compulsory Security Stamp Function

Data Management

Setting Items	Description
Auto Erase Memory Setting	Specify whether to erase files printed on the printer driver or image of the scanned original for each job automatically. Default: [Off] Encrypting Data to Prevent Data Leaks Caused by a Stolen or Disposed Machine
Erase All Memory	Delete all data stored in the machine.
Delete All Logs	Delete all logs stored in the machine.
Transfer Log Setting	This is a setting item to disable the log transfer settings that can be enabled on the Collect Logs server. To disable the log transfer settings, specify [Do not Forward].
Collect Logs Settings	Specify whether to activate the collection of Job Log, Access Log, and Eco-friendly Logs. Default Job Log: [Inactive] Access Log: [Inactive] Eco-friendly Logs: [Inactive]
Job Execution Restrictions When Log Limit is Reached	Specify whether to display a message on the control panel and send an e-mail to the administrator when the job log storage area is almost full. The machine will not accept any new jobs until the job log storage area has sufficient space. For details, see Operating the Machine Giving Priority to Job Log Maintenance. Default: [Off]
Setting for Consent to Acquisition of Data	Specify whether to allow information about operations to be acquired to improve our products. This setting item may not be displayed in your region. If it is not displayed, the following operations cannot be performed. If you select [Allow], the screen asking for your consent to the acquisition and use of information about operations is displayed. If you agree with the information displayed on the screen, select [Agree]. Doing so, allows the acquisition of information about operations. If you select [Disagree], the setting does not change. Default: [Prohibit]
Device Setting Information: Export (Memory Storage Device) Device Setting Information: Import (Memory Storage Device) Device Setting Information: Import Setting (Server) Device Setting Information: Run Import (Server)	You can export the machine's device information to an external device as a device setting information file, or import the exported device setting information file to the machine to restore the previous settings.
Restore Default Control Panel Settings	You can initialize the settings of the control panel, such as the settings, Home screen settings, and browser settings on the control panel.

File Management

Setting Items	Description
Machine Data Encryption Settings	Specify whether to encrypt the Address Book, authentication information, and Stored Files stored in the machine. Encrypting Data to Prevent Data Leaks Caused by a Stolen or Disposed Machine
Auto Delete File in Document Server	Specify whether to delete the files stored in the Document Server automatically. To delete the stored files automatically, specify a number of days and hours to delete after they are stored. Default: [Specify Days], [3] day(s) Changing the Storage Period of Document Server or Specifying an Indefinite Period
Capture: Delete All Unsent Files	Although the ScanRouter delivery software is required to use this setting, the ScanRouter delivery software is no longer available and supported.
Document Server Function	Specify whether to use the Document Server function. When you specify [Off], you cannot store files sent from the printer driver. Default: [On]
Default Privilege for Stored File	Specify the default settings of the access privileges for the files stored in the Document Server. Default: [Read-only] Specifying Access Privileges for Documents Stored in Document Server
PDF File Type: PDF/A Fixed	Specify the PDF file format to PDF/A only that can be stored for a long time. Default: [Off]

Security

Setting Items	Description
Extended Security Settings	Specify to encrypt transmitted data of the machine and data in the Address Book. For details, see "Specifying the Extended Security Functions" in this section.
Network Security Level	Specify the level of the Network Security and adjust the security level. Access Control
Access Control Function	Specify whether to enable the function to permit the communication within the specified range of the IP addresses (access control). Default: [Inactive] Access Control
Register/Delete Device Certificate	Program or delete a device certificate. Encrypting Network Communication
Service Mode Lock	Specify whether to lock the machine changing to Service Mode when a customer engineer performs maintenance and repair. Default: [Off] Restricting Operations of the Customer Engineer without the Supervision of the Machine Administrator
HDD Authentication Code	Enter the Authentication code of the hard disk of the machine within the range of 8 to 32 characters. Changing the HDD Authentication Code
CCC: Save Standard Values CCC: Apply Standard Values	Store or reflect the Device Settings (reference value) for the International Evaluation Regulations for Information Security (CC Authentication) in the hard disk of the machine. When you change the settings for maintenance of the machine, backup and restore the settings before and after maintenance, and the device settings to satisfy the CC Authentication standards can be kept.
Credential Storage	System (certificate system installed) Displays the contents of certificates installed in the system. Specify whether to use these certificates. User (certificate installed from SD card) Install certificates from an SD card. You can install up to 10 certificates. Delete All Certificates Deletes all contents of the installed certificates.
Server Settings	Specify whether to enable the server function for operating the Web application. You can install a server certificate for SSL communication. Default: Server Function: [Active] Setting Server Certificate: [The setting has not been made]
Install Settings	Specify whether to allow installation of the application with the SHA-1 signature.

Specifying the Extended Security Functions

This section describes settings displayed in [Extended Security Settings]. You can encrypt transmitted data and data in the Address Book. An administrator who can changes the settings depends on the setting item.

Setting Items	Description
Driver Encryption Key (Permissions: Network Administrator)	Specify a text string to decrypt login passwords or file passwords sent from each driver when user authentication is specified to ON. Register the encryption key specified using the machine in the driver.
Driver Encryption Key: Encryption Strength (Permissions: Network Administrator)	Specify encryption strength for sending jobs from the driver to the machine. The machine confirms the encryption strength of the password appended to a job and processes it. [Simple Encryption] All jobs that are verified by user authentication are accepted. [DES] Jobs encrypted with DES or AES are accepted. [AES] Jobs encrypted with AES are accepted. When you select [AES] or [DES], specify the encryption settings using the printer driver. For details about the settings of the printer driver, see the printer driver Help. Default: [Simple Encryption]
Restrict Display of User Information (Permissions: Machine Administrator)	Specify when user authentication is enabled. Specify whether to display all personal information hidden to confirm the job history using a network connection for which authentication is not provided. For example, the job history of Web Image Monitor is displayed as "*******". Default: [Off*]
Enhance File Protection (Permissions: File Administrator)	Specify whether to lock the files to be inaccessible if an invalid password is entered ten times. This can protect files from unauthorized access attempts to release the password using random passwords. If the Enhance File Protection function is specified, the icon () appears at the bottom left of the screen. When files are locked, it is not possible to select them even if the correct password is entered. Unlocking by the file administrator is required. Default: [Off]
Restrict Use of Destinations (Fax) Restrict Use of Destinations (Scanner) (Permissions: User Administrator)	Specify whether to limit the available fax and scanner destinations to the destinations registered in the Address Book and searched with the LDAP Search function. When you specify the setting to receive e-mails via SMTP using the Fax function, you cannot use this function. Default: [Off]
Restrict Adding of User Destinations (Fax) Restrict Adding of User Destinations (Scanner) (Permissions: User Administrator)	These are the settings when you do not use "Restrict Use of Destinations". Specify whether to restrict adding of user destinations entered directly in the Address Book. You can send e-mail to the destination entered directly. Default: [Off]
Transfer to Fax Receiver (Permissions: Machine Administrator)	Specify whether to prohibit the use of forwarding or transferring function of the Fax function. Default: [Do not Prohibit] Transferring Received Fax Documents to Another Fax Destination
Authenticate Current Job (Permissions: Machine Administrator)	This is a setting item to specify when Basic authentication, Windows authentication, or LDAP authentication is activated. Specify whether authentication is required for operations such as interrupting jobs under the Copier function or canceling jobs under the Printer function. When you specify [Login Privilege], authorized users who have the privilege to use the current function can operate the job. When you specify [Access Privilege], users who execute the job and the machine administrator can operate the job. Default: [Off]
@Remote Service (Permissions: Machine Administrator)	Specify how to use the @Remote Service. If it is specified to [Prohibit Some Services], it becomes impossible to change settings via a remote connection from the center, providing optimally secure operation. Default: [Do not Prohibit]
Update Firmware (Permissions: Machine Administrator)	Specify whether to prohibit firmware updates on the machine by a service representative or via the network. Default: [Do not Prohibit]
Change Firmware Structure (Permissions: Machine Administrator)	Specify whether to prevent changes in the machine's firmware structure without confirmation by a machine administrator. When you specify [Prohibit] and the machine detects the structure change, the machine starts after authenticated by a machine administrator. As the new firmware version is displayed on the screen, the administrator can confirm whether the updated structure change is permissible or not. Default: [Do not Prohibit]
Password Policy (Permissions: User Administrator)	Specify whether to limit the text and the number of characters for the password. Specify a password using a combination of 2 or more types of characters for [Level 1] and 3 or more types of characters for [Level 2] selected from the types described below. Upper-case letters, lower-case letters, decimal numbers, and symbols such as # You can specify passwords that meet the conditions specified in complexity and minimum character number. Default Complexity Setting: [Off] Minimum Number of Characters: [0] characters
Settings by SNMPv1, v2 (Permissions: Network Administrator)	Specify whether to prohibit setting change on the machine by SNMPv1/v2 protocol. You can change the machine configuration without Administrator Privileges because authentication cannot be performed by SNMPv1/v2 protocol, but if you specify [Prohibit], you can prevent the change that is not intended by the administrator. Default: [Do not Prohibit]
Password Entry Violation (Permissions: Machine Administrator)	Specify the standards that the system recognizes the access as a password attack. If the number of authentication requests exceeds the number specified by the setting, the access is recorded in the Access Log and the log data is sent to the machine administrator by e-mail. You can specify Maximum Allowed Number of Access up to 100 and Measurement Time up to 10 seconds. If the Maximum Allowed Number of Access is set to "0", password attacks are not detected. Default Maximum Allowed Number of Access: [30] time(s) Measurement Time: [5] second(s) If you receive violation detection e-mails frequently, check the content and review the setting values.
Device Access Violation (Permissions: Machine Administrator)	Specify the standards that the system recognizes the access as an access violation. If the number of login requests exceeds the number specified by the setting, the access is recorded in the Access Log and the log data is sent to the machine administrator by e-mail. Also, a message is displayed on the control panel and on Web Image Monitor. You can specify Maximum Allowed Number of Access up to 500 and Measurement Time up to 10 to 30 seconds. If the Maximum Allowed Number of Access is set to "0", access violations are not detected. Also, you can specify response delay time for login requests when an access violation is detected (Authentication Delay Time) or the number of acceptable authentication attempts (Simultaneous Access Host Limit). Default Maximum Allowed Number of Access: [100] time(s) Measurement Time: [10] second(s) Authentication Delay Time: [3] second(s) Simultaneous Access Host Limit: [200] If you receive violation detection e-mails frequently, check the content and review the setting values.
Security Setting for Access Violation (Permissions: Machine Administrator)	Specify whether to prevent the incorrect lockout caused by the network environment. When you log in to the machine via a network application, a user may be locked out by mistake because the number of authentication attempts by the user does not match the number of the attempts specified on the machine. For example, access may be denied when a print job for multiple sets of pages is sent from an application. In this case, specify the setting to On, and control the lockout by period but not by counts. When you specify [On], you can specify the period to deny the continuous accesses by a user (0 to 60 minutes). You can also specify how many user accounts or passwords can be managed (50 to 200) and the monitoring interval (1 to 10 seconds). Default: [Off]

Setting Items

Description

Driver Encryption Key

(Permissions: Network Administrator)

Specify a text string to decrypt login passwords or file passwords sent from each driver when user authentication is specified to ON.

Driver Encryption Key: Encryption Strength

(Permissions: Network Administrator)

Specify encryption strength for sending jobs from the driver to the machine. The machine confirms the encryption strength of the password appended to a job and processes it.

[Simple Encryption]
All jobs that are verified by user authentication are accepted.
[DES]
Jobs encrypted with DES or AES are accepted.
[AES]
Jobs encrypted with AES are accepted.

When you select [AES] or [DES], specify the encryption settings using the printer driver. For details about the settings of the printer driver, see the printer driver Help.

Default: [Simple Encryption]

Restrict Display of User Information

(Permissions: Machine Administrator)

Specify when user authentication is enabled. Specify whether to display all personal information hidden to confirm the job history using a network connection for which authentication is not provided. For example, the job history of Web Image Monitor is displayed as "********".

Default: [Off]

Enhance File Protection

(Permissions: File Administrator)

Specify whether to lock the files to be inaccessible if an invalid password is entered ten times. This can protect files from unauthorized access attempts to release the password using random passwords.

If the Enhance File Protection function is specified, the icon ( Operation panel screen illustration ) appears at the bottom left of the screen.

When files are locked, it is not possible to select them even if the correct password is entered. Unlocking by the file administrator is required.

Default: [Off]

Restrict Use of Destinations (Fax)

Restrict Use of Destinations (Scanner)

(Permissions: User Administrator)

Specify whether to limit the available fax and scanner destinations to the destinations registered in the Address Book and searched with the LDAP Search function.

When you specify the setting to receive e-mails via SMTP using the Fax function, you cannot use this function.

Default: [Off]

Restrict Adding of User Destinations (Fax)

Restrict Adding of User Destinations (Scanner)

(Permissions: User Administrator)

These are the settings when you do not use "Restrict Use of Destinations". Specify whether to restrict adding of user destinations entered directly in the Address Book. You can send e-mail to the destination entered directly.

Default: [Off]

Transfer to Fax Receiver

(Permissions: Machine Administrator)

Specify whether to prohibit the use of forwarding or transferring function of the Fax function.

Default: [Do not Prohibit]

Transferring Received Fax Documents to Another Fax Destination

Authenticate Current Job

(Permissions: Machine Administrator)

This is a setting item to specify when Basic authentication, Windows authentication, or LDAP authentication is activated. Specify whether authentication is required for operations such as interrupting jobs under the Copier function or canceling jobs under the Printer function.

When you specify [Login Privilege], authorized users who have the privilege to use the current function can operate the job.

When you specify [Access Privilege], users who execute the job and the machine administrator can operate the job.

Default: [Off]

@Remote Service

(Permissions: Machine Administrator)

Specify how to use the @Remote Service.

If it is specified to [Prohibit Some Services], it becomes impossible to change settings via a remote connection from the center, providing optimally secure operation.

Default: [Do not Prohibit]

Update Firmware

(Permissions: Machine Administrator)

Specify whether to prohibit firmware updates on the machine by a service representative or via the network.

Default: [Do not Prohibit]

Change Firmware Structure

(Permissions: Machine Administrator)

Specify whether to prevent changes in the machine's firmware structure without confirmation by a machine administrator.

When you specify [Prohibit] and the machine detects the structure change, the machine starts after authenticated by a machine administrator. As the new firmware version is displayed on the screen, the administrator can confirm whether the updated structure change is permissible or not.

Default: [Do not Prohibit]

Password Policy

(Permissions: User Administrator)

Specify whether to limit the text and the number of characters for the password.

Specify a password using a combination of 2 or more types of characters for [Level 1] and 3 or more types of characters for [Level 2] selected from the types described below.

Upper-case letters, lower-case letters, decimal numbers, and symbols such as #

You can specify passwords that meet the conditions specified in complexity and minimum character number.

Default
- Complexity Setting: [Off]
- Minimum Number of Characters: [0] characters

Settings by SNMPv1, v2

(Permissions: Network Administrator)

Specify whether to prohibit setting change on the machine by SNMPv1/v2 protocol. You can change the machine configuration without Administrator Privileges because authentication cannot be performed by SNMPv1/v2 protocol, but if you specify [Prohibit], you can prevent the change that is not intended by the administrator.

Default: [Do not Prohibit]

Password Entry Violation

(Permissions: Machine Administrator)

Specify the standards that the system recognizes the access as a password attack. If the number of authentication requests exceeds the number specified by the setting, the access is recorded in the Access Log and the log data is sent to the machine administrator by e-mail.

You can specify Maximum Allowed Number of Access up to 100 and Measurement Time up to 10 seconds. If the Maximum Allowed Number of Access is set to "0", password attacks are not detected.

Default
- Maximum Allowed Number of Access: [30] time(s)
- Measurement Time: [5] second(s)

If you receive violation detection e-mails frequently, check the content and review the setting values.

Device Access Violation

(Permissions: Machine Administrator)

Specify the standards that the system recognizes the access as an access violation. If the number of login requests exceeds the number specified by the setting, the access is recorded in the Access Log and the log data is sent to the machine administrator by e-mail. Also, a message is displayed on the control panel and on Web Image Monitor.

You can specify Maximum Allowed Number of Access up to 500 and Measurement Time up to 10 to 30 seconds. If the Maximum Allowed Number of Access is set to "0", access violations are not detected.

Also, you can specify response delay time for login requests when an access violation is detected (Authentication Delay Time) or the number of acceptable authentication attempts (Simultaneous Access Host Limit).

Default
- Maximum Allowed Number of Access: [100] time(s)
- Measurement Time: [10] second(s)
- Authentication Delay Time: [3] second(s)
- Simultaneous Access Host Limit: [200]

If you receive violation detection e-mails frequently, check the content and review the setting values.

Security Setting for Access Violation

(Permissions: Machine Administrator)

Specify whether to prevent the incorrect lockout caused by the network environment.

When you log in to the machine via a network application, a user may be locked out by mistake because the number of authentication attempts by the user does not match the number of the attempts specified on the machine. For example, access may be denied when a print job for multiple sets of pages is sent from an application. In this case, specify the setting to On, and control the lockout by period but not by counts.

When you specify [On], you can specify the period to deny the continuous accesses by a user (0 to 60 minutes). You can also specify how many user accounts or passwords can be managed (50 to 200) and the monitoring interval (1 to 10 seconds).

Default: [Off]

Remote Panel Operation

Setting Items	Description
Remote Operation/Monitoring	Specify the password required for receiving remote support on the machine, the time-out duration, and other settings.

Function Restriction

Setting Items	Description
Menu Protect	Specify the level of access privilege to allow changing the settings for the functions that can be changed by non-administrative users.
Restrict Functions of Each Application	You can specify not to use the copier, Document Server, scanner, and printer applications individually. You can also specify the following limitations. Specifying the scan to Limit to Auto Color Selection Specifying the destination of the Scanner function to e-mail or folder

Authentication/Charge

Administrator Authentication/User Authentication/App Auth.

Setting Items	Description
Administrator Authentication Management Register/Change Administrator	Specify whether an Administrator manages the settings of the machine. Register the user name and password of the administrator to prevent the settings changed by the user other than the administrator. You can manage four categories; user management, machine management, network management, and file management. Registering Administrators Before Using the Machine
User Authentication Management	Specify the authentication method to authenticate the user. When you specify the authentication, you can limit the functions to use or the access to the Address Book or stored files. Default: [Off] Verifying Users to Operate the Machine (User Authentication)
Setting for Entering Authentication Password	Specify whether to allow double-byte characters to be used for passwords. Default: [Only 1 Byte Characters]
Application Authentication Management	This is a setting item to specify when the authentication is activated by [User Authentication Management]. Specify the authentication for each application.
Application Authentication Settings	Specify the available application for each user. For example, you can specify to inhibit the use of all applications related to the Copier function or to use only a part of application related to the Copier function.
User's Own Customization	Specify whether to store the layout of Home screen or Application screen and the displayed language for each login user. Default: [Prohibit]
Register/Change/Delete Realm	Program the realm to be used for Kerberos authentication. Be sure to specify both Realm Name and KDC Server Name when programming a realm. Registering the Realm
Register/Change/Delete LDAP Server	You can register up to five settings for the LDAP Server. Registering the LDAP Server
LDAP Search	Specify whether to use the LDAP server for searching destinations or users. Set "Follow Referrals on LDAP Server" to use Referral when executing the LDAP search. Default: LDAP Search: [Off] Follow Referrals on LDAP Server: [Inactive]

Print Volume Use Limitation

Setting Items	Description
Machine Action When Limit is Reached	Specify whether to continue printing when Print Volume Use reaches the limit. Default: [Allow Continue Use]
Volume Use Counter: Scheduled/Specified Reset Settings	Specify whether to reset the Volume Use Counter periodically. Default: [Do not Specify]
Print Volume Use Limitation: Default Limit Value	Specify the limit value of the Print Volume Use.
Print Volume Use Limitation: Unit Count Setting	Specify the function and count to limit the print volume use.

External Charge Unit Management

Setting Items	Description
Key Counter Management	Specify whether to limit the user with the key counter for each function.
External Charge Unit Management	Specify whether to limit the user for each function with the key card.
Enhanced External Charge Unit Management	Specify the external charge unit used with the SDK application.