User GuideIM 7000/8000/9000

Copying One Original Image Twice on One Sheet

You can copy an original image twice and arrange it horizontally or vertically on a single sheet of paper (Double Copies).

For example, when copying an A4 (81/2 × 11)-size original onto multiple sheets, you can copy it on an A3 (11 × 17)-size sheet in Double Copies mode and cut the copied sheet to reduce the number of times copying is performed.

Illustration of double copies

1Press [Copy] on the Home screen.

Operation panel screen illustration

2Press [Double Copies] on the Copy screen.

Operation panel screen illustration

If the key is not found, select it from [Edit / Stamp].

3Press [Paper Select] to specify the copy paper.

Operation panel screen illustration
  • When you specify [Auto Paper Select], the size of the sheet on which the full-size original can be copied is selected.

  • When you specify other than [Auto Paper Select], the image is enlarged or reduced according to the size of the sheet for Double Copies.

4Place the original.

Basic Procedure for Copying Documents

When the original size cannot be detected properly on the exposure glass for Double Copies, specify the paper to use or paper size manually or place the original in the ADF. For the original size detected on the exposure glass or in the ADF automatically, see the following section:

Sizes Detectable with Auto Paper Select

5Press [Start].

Note

  • You can specify whether or not to print a separation line and the type of separation line by [Double Copies Separation Line].

  • Edit / Stamp