Specifying Maximum Print Volume Use of Each User
You can specify print volume limits in the machine for each user registered in the address book. If the total print volume reaches the specified maximum, the print jobs are canceled.
Print Volume Use
How to count Print Volume Use
The print volume is calculated by multiplying the number of pages by a unit count.
The unit count can be specified according to the printing condition. For example, if two pages are printed with a unit count of 5, the print volume would be 10.
You can specify the unit count for each paper size.
How to check the print volume use counter
The way of checking by the administrator differs from the way by the users.
The administrator can check the print volume use counter from [Administrator Tools].
The users can check the print volume use counter on the pop-up screen displayed when logging in. The print volume use counter is displayed on top right of the screen during logging in.
Printing whose volume cannot be limited
Print volume are not limited in the following operations:
Printing from an operating system that does not support the current authentication method.
Printing of a file attached to an e-mail received in the machine
Printing of receiving faxes and LAN-Fax data
When specifying Print Volume Use, if the login user name or user code registered in the address book is changed while the user is logged in, printing is not possible.
Under Windows or LDAP authentication, do not register the same login user name or password for multiple users registered in the address book. The print volume limits are not applied to these users.
The maximum print volume use is not applied to output from Mac/Linux.
When User Code Authentication Is Enabled
Specify "Functions to Restrict" of "User Authentication Management" to restrict all functions. The user code authentication is not applied to the functions that are not restricted. Users before logging in can print regardless of the print volume limits.
Do not select PC Control in the Printer function of "Functions to Restrict" of "User Authentication Management". Print volume limit setting is not applied to users whose user codes are registered automatically by the printer driver.
When User Code Authentication is enabled, the maximum print volume and total print volume are not displayed on the screen, and users cannot check the total print volume by themselves. The administrator needs to inform users about their total print volume.
No log data about print use limits is recorded in the Job log or Access log.
To check "Functions to Restrict" of "User Authentication Management", press [System Settings]
[Settings for Administrator][Authentication/Charge][Administrator Authentication/User Authentication/App Auth.][User Authentication Management].
Limiting Print Volume
The following settings are necessary to limit print volume.
[Machine Action When Limit is Reached]: Specify whether to continue printing when print volume reaches its maximum.
[Print Volume Use Limitation: Unit Count Setting]: Specify the functions to restrict print volume and specify the count unit.
[Print Volume Use Limitation: Default Limit Value]: Specify the default value of the maximum print volume.
Log in to the machine as the machine administrator on the control panel.
On the Home screen, press [Settings].
On the Settings screen, press [System Settings].
Press [Settings for Administrator][Authentication/Charge][Print Volume Use Limitation][Machine Action When Limit is Reached].
From the list next to Machine Action When Limit is Reached, select the machine action when total print volume reaches the maximum.
Stop Job: Both the current job and waiting jobs are canceled.
Finish Job and Limit: The current job is completed but waiting jobs are canceled.
Allow Continue Use: Specifies no limitation for print volumes.
Press [OK].
The configuration of Machine Action When Limit is Reached is completed. Proceed to the configuration to restrict print volume and to specify the count unit.
Press [Print Volume Use Limitation: Unit Count Setting].
For each of the functions to restrict, enter a count unit.
For example, if you specify "0" for the printer condition, no volume limit is applied to jobs matching that condition.
Press [OK].
The configuration of Print Volume Use Limitation: Unit Count Setting is completed. Proceed to the configuration of the default maximum use count.
Press [Print Volume Use Limitation: Default Limit Value].
Enter a count unit as the maximum print volume.
Press [OK].
Press [Home] (
), and then log out of the machine.
Specifying the Maximum Use Count per User
Specify whether to restrict the print volume of the users registered in the address book, and specify the maximum print volume per user.
Log in to the machine as the user administrator on the control panel.
On the Home screen, press [Address Book].
On the Address Book screen, select a user, and then press [Edit].
Press the [User Management / Others] tab [User Management].
Press [Print Vol. Use Limitation].
From the list next to Print Vol. Use Limitation, select [Limit], and then enter the limit value.
Enter the maximum print volume of the selected user in Print Volume Use Limit Value.
Press [OK] three times.
Press [Exit], and the log out of the machine.
Resetting Print Volume Use Counter Regularly
Specify the frequency to reset the print volume use counter.
Log in to the machine as the machine administrator on the control panel.
On the Home screen, press [Settings].
On the Settings screen, press [System Settings].
Press [Settings for Administrator][Authentication/Charge][Print Volume Use Limitation][Volume Use Counter: Scheduled/Specified Reset Settings].
From the list next to Reset Interval, select the frequency to reset the print volume use counter.
Every Month: Resets the print volume at the specified time and date each month.
Specify Date: Resets the print volume at the specified time and date only once.
Specify Cycle: Resets after the specified interval from a reference date, then reset thereafter at the same interval.
Do not Specify: The print volume use counter is not reset regularly. Reset the print volume use counter manually as necessary.
Specify the date and time to reset, and then press [OK].
Press [Home] (), and then log out of the machine.