Scan Settings (Scanner Settings)

This section describes the settings in the [Scan Settings] tab under [Scanner Settings].

Setting Items	Description
A.C.S. Sensitivity Level	When specifying [Auto Color Select] in [Send Settings] on the scanner screen, adjust the threshold value for identifying originals to be in black and white or color from five levels. Default: (Level in the center among five levels)
Wait Time for Next Orig.: Exposure Glass	Specify the time to wait after scanning a page before starting scanning of the next page when scanning an original with multiple pages on the exposure glass and sending the scanned images together. Continuous Wait The machine waits for the next original to be placed until you press [Scanning finished]. No time limit is imposed. Off Transmission starts automatically after scanning a single page in an original. Set Wait Time Specify the time to wait for the next original to be placed (3-999 seconds). Transmission starts automatically after the specified time elapses. The machine pauses counting down of the waiting time and waits until [Scanning finished.] is pressed in the following cases: When you change the scan condition or other setting When you open the upper cover of the ADF When you press [Interrupt mode] and perform copying operation When a paper jam occurs Default: [Set Wait Time]: [60 seconds] This setting becomes invalid when [SADF] or [Batch] is selected in [Send Settings][Original Feed Type] on the scanner screen. Combining the Data of Multiple Scans into a Single File
Wait Time for Next Original(s): SADF	Specify the time to wait after scanning a stack of a multi-page original before starting scanning of the next stack when scanning an original with multiple pages in the ADF and sending the scanned images together. Continuous Wait The machine waits for the next original to be placed until you press [Scanning finished.]. No time limit is imposed. Set Wait Time Specify the time to wait for the next original to be placed (3-999 seconds). Transmission starts automatically after the specified time elapses. The machine pauses counting down of the waiting time and waits until [Scanning finished.] is pressed in the following cases: When you change the scan condition or other setting When you open the upper cover of the ADF When you press [Interrupt mode] and perform copying operation When a paper jam occurs Default: [Set Wait Time]: [60 seconds] This setting is only invalid when [SADF] is selected in [Send Settings][Original Feed Type] on the scanner screen. Combining the Data of Multiple Scans into a Single File
Background Density of ADS (Full Color)	Specify the degree of removing the background color from five levels when scanning a magazine or newspaper and removing the background color. Default: (Level in the center among five levels)
Blank Page Detect	Specify the setting to display a warning message and cancel scanning when the first page scanned in an original is blank. This setting is only valid when placing the original in the ADF. Default: [On]
Blank Page Detection Level	Specify the sensitivity to detect a blank page. Default: (Level in the center among seven levels)
Reproduction Ratio	Specify the scaling ratio displayed in [Send Settings][Scan Ratio] on the scanner screen. You can specify a ratio between 25-400%.
Program / Change / Delete Scan Size	Register, change, or delete the size displayed in [Send Settings][Scan Size][Programmed Size] on the scanner screen. You can register up to five settings.