Using DHCP
You can use the machine in a DHCP environment. You can also register the printer NetBIOS name on a WINS server when it is running.
Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS server.
Supported DHCPv4 servers are Microsoft DHCP Server included with Windows Server 2008/2008 R2/2012/2012 R2/2016/2019, and the DHCP server included with UNIX.
Supported DHCPv6 servers are Microsoft DHCP Server included with Windows Server 2008/2008 R2/2012/2012 R2/2016/2019, and the DHCP server included with UNIX.
DHCPv6 function is not available with WINS server.
If you do not use the WINS server, reserve the printer's IP address in the DHCP server so the same IP address is assigned every time.
To use the WINS server, change the WINS server setting to "active" using the control panel.
Using the WINS server, you can configure the host name via the remote network printer port.
DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN, it will result in increased line charges. This is because your computer connects to the ISDN line whenever a packet is transferred from the machine.
If there is more than one DHCP server, use the same setting for all servers. The machine operates using data from the DHCP server that responds first.
Using AutoNet
If the machine IPv4 address is not automatically assigned by the DHCP server, a temporary IP address starting with 169.254 and not being used on the network can be automatically selected by the machine.
The IP address assigned by the DHCP server is given priority over that selected by AutoNet.
You can confirm the current IPv4 address on the configuration page.
When AutoNet is running, the NetBIOS name is not registered on the WINS server.
The machine cannot communicate with devices that do not have the AutoNet function. However, this machine can communicate with Macintosh computers running Mac OS X 10.11 or later.