SYSTEM

This section describes the user tools in [SYSTEM] under [Screen Features].

For details on how to access Screen Features, see Accessing Screen Features.

Screen Device Settings Information

Status

Displays the current status of the control panel. You can check the following items.

Wi-Fi MAC address
Bluetooth address
Interface Settings
Wi-Fi
IP address

IP address is displayed when Wi-Fi is connected.

Legal information

Open source licenses
You can check the open source license information.

Software Version List

You can check the versions of the software that is installed.

Screen Device Settings

Contact your sales or service representative to use this function.

Screen Startup Mode

Select the startup mode of the control panel.

Normal
When you turn on the power, the Home screen appears after the startup screen is displayed. Normal mode uses less energy than Quick mode.
Quick
The Home screen appears as soon as you turn on the power.

Default: [Quick]

Screen SD Card Slot

Specify whether or not enable the SD card slot when you use the functions of the control panel.

Default: [Active]

Screen USB Memory Slot

Specify whether or not enable the USB slot when you use the functions of the control panel.

Default: [Active]

Server Settings

Server Function
Specify whether or not enable the server function.
Default: [Active]
Install Server Certificate
You can install a server certificate for SSL communication.

Application Authentication Settings

General Settings for Application Authentication
Specify the default privileges for all users to be able to use the applications.
Privileges to Use for Each User
Specify the default privileges for each user to be able to use the applications.

Function Priority

Specify the mode to be displayed automatically after the operation switch is turned on or when System Reset mode is turned on. You can select one of the following modes:

Home
Connector
Copier(Classic)
Copy
Document Server
Fax
Fax(Classic)
Notes
Print/Scan(Memory Storage Device)
Printer
Printer(Classic)
Quick Copy
Quick Fax
Quick Print Release
Quick Scanner
RSS Reader
Scan to Folder Helper
Scanner
Scanner(Classic)
Web Browser NX
decEmulatorWidget

Default: [Home]

Function Key Settings

Function Key
Specify whether or not to enable the function keys.
If the function keys are disabled, [Function Key 1] to [Function Key 3] are not available.
Default: [Inactive]
Function Key 1 to 3
- Allocated Function
  Specify the application allocated to the function key.
  Default: [Not Programmed]
- Display Name
  Enter the name of up to 64 characters to be displayed in the function key. The name cannot be entered if [Allocated Function] is set to [Not Programmed].
  Default: [blank]

IC Card/Bluetooth Software Settings

Specify the IC card reader connected to the control panel or the function used via Bluetooth on the control panel. For details about this function, see "Quick Card Authentication", Security.

User's Own Customization

Specify whether or not to reflect each user's settings on the control panel when the user logs in to the machine.

Default: [Prohibit]

System Bar Settings (Top of Screen)

Banner System Message Display Time
- Time Message Displayed (sec.)
  Specify how long a message is displayed in a banner on the control panel before it switches to the next message. You can select a range of 1.8 to 6.0 seconds in 0.2 second intervals.
  Default: [4.0]
- Time Message Not Displayed (sec.)
  Specify how long the banner on the control panel remains blank while a message displayed switches to another one following it. You can select a range of 0.8 to 3.0 seconds in 0.2 second intervals.
  Default: [2.0]
Display Type
Switches the banner display.
Default: [Display Function Keys on Bar]
Larger and Brighter Key Display
Switches the banner display.
You can change this setting only when [Display Function Keys on Bar] is selected.
Default: [Active]

Support Settings

Help Functions
Specify whether or not the help () icon is displayed in the banner on the control panel. You can access Help when pressing the help () icon.
Default: [On]
Display Guidance Screen
Specify whether or not the guidance screen is displayed every time you press the help () icon. If you disable this setting, the guidance screen is displayed only when you access Help for the first time.
Display Online Help Preferentially
Specify whether or not the online Help is displayed preferentially to the internal offline Help.
Default: [On]

[Back] Key

Specify whether or not to enable the function to return to the previous screen when you are using applications. Even enabled, this function may not be applicable, depending on screens such as those for the top page of an application or error display screens. When the function is disabled, an error tone sounds when you push [Return].

Whether this setting is enabled or disabled, the operation is always enabled for the standard Android application screens or screen features.

Default: [ON]

Initialize Screen Features Settings

You can initialize the settings of the control panel, such as the initial settings, home screen settings, and browser settings on the control panel.