Power Connection
- Avoid taking the following actions because doing so can result in fire or electric shock:
Using any power supply voltage or frequencies other than those that match the specifications shown
Using multi-socket adaptors
Using extension cords
Touching the prongs of the power cable's plug with anything metallic
- Avoid applying the following actions to power cords because doing so can result in fire or electric shock:
Damaging them
Bundling them
Modifying them
Putting heavy objects on them
Pulling them forcibly
Bending them forcibly
- The supplied power cord or cords are for use with this machine only. They cannot be used for appliances other than this machine. Also, do not use power cords other than the power cord or cords supplied with this machine. Doing so can result in fire or electric shock.
- Do not handle the power cord plug with wet hands. Doing so can result in electric shock.
- To prevent fire or electric shock, disconnect the plug and the power cord from the wall outlet at least once a year and check them. If any of the following conditions exist, do not use the plug and the power cord continuously, and consult your dealer or service representative.
There are burn marks on the plug
The prongs on the plug are deformed
The power cord's inner wires are exposed or broken
The power cord's coating is cracked, dented, or damaged
When the power cord is bent, the power turns off and on
Part of the power cord becomes hot
- Be sure to push the power cord plug fully into the wall outlet. Also, do not push it into loose and unstable wall outlets likely to cause a contact failure. Doing so can result in heat generation.
- If you do not use the machine for a long period of time such as consecutive holidays, be sure to disconnect the power cord plug from the wall outlet for reasons of safety.
- When disconnecting the power cord from the wall outlet, make sure to pull the plug, not the cord. Do not pull the power cord forcibly. Doing so can damage the power cord, possibly resulting in fire or electric shock.
- Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
- When performing maintenance on the machine, disconnect the power cord from the wall outlet for safety.
Power Source
(mainly Europe and Asia)220–240 V, 7 A, 50/60 Hz
(mainly North America)120–127 V, 12 A or more, 60 Hz
Please be sure to connect the power cord to a power source as above.
(mainly Europe)For users in Norway, this product is also designed for an IT power distribution system with phase-to-phase voltage of 230V.
Voltage tolerance
- (mainly Europe and Asia)
Voltage must not fluctuate by more than 10%.
- (mainly North America)
Voltage must not fluctuate by more than +8.66% or less than -10%.