How to Replace the Dustproof Filter

Take out the new dustproof filter (two sheets) from the bag.

Check the position of the vents on the left and right side of the machine.

The procedure for replacing the dustproof filter is same for left and right side. This section describes the procedure of the left side for example.

Open the rear cover to stop the fans.

Vacuum the dust on the filter cover.

Slightly push down the filter cover, and remove it.

Remove the filter.

Put the used dustproof filter in the bag that the new dustproof filter was in.

Vacuum the dust on the ventilation hole.

Remove the release paper from new dustproof filter, and attach it so that it covers whole vents.

Attach the dustproof filter with its adhesive tape parts up.

Attach the filter cover.

Insert the tab located on the lower position of the filter cover to the machine, and then push the upper position until it clicks.

Replace the filter on the right side by following steps 4 to 9.