Functions Available on the [Fax Features] Menu for Remote Fax

You can specify the following items for the Fax Features menu on the sub-machine:

General Settings

Quick Operation Key (1–3)
If [On] is selected, the Quick Operation keys can be registered with the following items:
Fax Header Print, TX File Status (Transmission File Status), RX File Status (Reception File Status), Communi. Result Rep. (Communication Result Report)
Switch Title
Search Destination

See General Settings.

Scan Settings

Program / Change / Delete Scan Size
Wait Time for Next Orig.: Exposure Glass

See Scan Settings.

Reception Settings

2 Sided Print
Paper Tray

See Reception Settings.

Initial Settings

Parameter Setting
You can configure the following User Parameter Switches to change function settings. Do not change any bit switches other than the following:
- Print sheet is limited to that which has highest priority (Just size printing) (switch 05, bit 5)
- Empty tray alert (Paper Empty Warning) even when one paper tray is empty (switch 05, bit 7)
- Detect and report nearly blank documents when scanning (switch 11, bit 2)
- Reset when function changed (switch 14, bit 3)
- Selecting the available paper feed tray (switch 15, bit 2, 1, 0)
- Whether or not to select the available paper feed tray (switch 15, bit 5)
- Whether you need to press [Add] after specifying a destination with the destination key when broadcasting (switch 17, bit 2)
- Whether or not to reset the settings when original is scanned (switch 17, bit 3)
- The sub-machine beeps to let you know when it has printed a received document (switch 37, bit 6)
Program Fax Information (Fax Header)
Menu Protect

See Initial Settings and Parameter Settings.

You cannot use the functions that the main-machine does not support.