Preset Stamp (Copier / Document Server Features)
This section describes the user tools in the Preset Stamp menu under [Stamp].
Stamp Language
You can select the language of the message printed in Preset Stamp mode.
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish, Greek, Brazilian Portuguese
Default: [English]
Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
Default: [COPY]
Stamp Format
Specify how each of stamps is printed.
Stamp Position
Specify where to print the stamp. For details about the stamp position, see Stamps.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)Stamp positions
Default
Possible range
Top Left
24 mm from the left edge
24 mm from the top edge
From 3 to 118 mm from the left edge
From 3 to 118 mm from the top edge
Top Center
Center
24 mm from the top edge
From 0 to 59 mm to the right or left of the center
From 3 to 118 mm from the top edge
Top Right
24 mm from the right edge
24 mm from the top edge
From 3 to 118 mm from the right edge
From 3 to 118 mm from the top edge
Center Left
24 mm from the left edge
Center
From 3 to 118 mm from the left edge
From 0 to 59 mm to the toward the top or bottom of the center
Center
Center
From 0 to 59 mm to the right or left of the center
From 0 to 59 mm to the toward the top or bottom of the center
Center Right
24 mm from the right edge
Center
From 3 to 118 mm from the right edge
From 0 to 59 mm to the toward the top or bottom of the center
Bottom Left
24 mm from the left edge
24 mm from the bottom edge
From 3 to 118 mm from the left edge
From 3 to 118 mm from the bottom edge
Bottom Center
Center
24 mm from the bottom edge
From 0 to 59 mm to the right or left of the center
From 3 to 118 mm from the bottom edge
Bottom Right
24 mm from the right edge
24 mm from the bottom edge
From 3 to 118 mm from the right edge
From 3 to 118 mm from the bottom edge
(mainly North America)Stamp positions
Default
Possible range
Top Left
0.9 inch from the left edge
0.9 inch from the top edge
From 0.2 to 4.6 inches from the left edge
From 0.2 to 4.6 inches from the top edge
Top Center
Center
0.9 inch from the top edge
From 0 to 2.3 inches to the right or left of the center
From 0.2 to 4.6 inches from the top edge
Top Right
0.9 inch from the right edge
0.9 inch from the top edge
From 0.2 to 4.6 inches from the right edge
From 0.2 to 4.6 inches from the top edge
Center Left
0.9 inch from the left edge
Center
From 0.2 to 4.6 inches from the left edge
From 0 to 2.3 inches to the toward the top or bottom of the center
Center
Center
From 0 to 2.3 inches to the right or left of the center
From 0 to 2.3 inches to the toward the top or bottom of the center
Center Right
0.9 inch from the right edge
Center
From 0.2 to 4.6 inches from the right edge
From 0 to 2.3 inches to the toward the top or bottom of the center
Bottom Left
0.9 inch from the left edge
0.9 inch from the bottom edge
From 0.2 to 4.6 inches from the left edge
From 0.2 to 4.6 inches from the bottom edge
Bottom Center
Center
0.9 inch from the bottom edge
From 0 to 2.3 inches to the right or left of the center
From 0.2 to 4.6 inches from the bottom edge
Bottom Right
0.9 inch from the right edge
0.9 inch from the bottom edge
From 0.2 to 4.6 inches from the right edge
From 0.2 to 4.6 inches from the bottom edge
Size
You can select the size of the stamp.
Default: [1 X]
Density
You can select the pattern used to print the stamp.
Default: [Normal]
Normal
The stamp is printed on the image. You cannot check which parts will overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
For details about how to change the Copier / Document Server Features, see Changing Default Settings in the Copy / Document Server Features Menu.