Machine Options
Guide to Functions of the Machine’s External Options
(1) Options Mounted to the Machine’s Top Section
No. | Option | Description |
|---|---|---|
1 | ADF double-feed detection kit | Detects a double feeding of the original when it is placed in the ADF. |
2 | Card reader | Pass an IC card over the card reader to log in to the machine. |
(2) Options Mounted to the Machine’s Right Side Section
No. | Option | Description |
|---|---|---|
1 | Multi bypass banner sheet tray | Allows you to load paper that has a horizontal length of 487.8 mm (19.21 inches) or longer in the bypass tray. |
2 | Banner sheet guide tray | Allows you to load paper that has a horizontal length of 487.8 mm (19.21 inches) or longer in the bypass tray. |
3 | Wide LCT | Holds 2,200 sheets of paper. Use to copy or print onto transparencies, adhesive labels, translucent paper, and custom size paper. |
4 | Large capacity tray (LCT) | Holds up to 4,400 sheets of paper. |
5 | Extension unit of LCT | Attached to the LCT and holds 2,500 sheets of B4 JIS |
6 | Multi bypass tray (Tray A) | Holds up to 500 sheets of paper. |
7 | Banner sheet tray of multi bypass tray (Tray A) | Allows you to load large-sized paper in the multi bypass tray (Tray A). |
8 | Multi bypass attachment kit | Attaches the multi bypass tray (Tray A) to the two-tray wide LCT. |
9 | Two-tray wide LCT | Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 191/5. |
10 | Banner sheet tray of two-tray wide LCT | Allows you to load large-sized paper in the two-tray wide LCT. |
11 | Two-tray wide LCT connection unit | Connects the main unit to the two-tray wide LCT. |
, A4(3) Options Mounted to the Machine’s Left Side Section 1
No. | Option | Description |
|---|---|---|
1 | Copy tray | If you select this as the output tray, copied/printed paper and fax messages are delivered here face down. |
2 | Decurler unit | Flattens curls from sheets to prevent paper jams. |
3 | Buffer pass unit | Cools copies or prints. |
4 | Twin interposer | Inserts cover or slip sheets into copied or printed paper. |
5 | Folding unit | Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold. |
(3) Options Mounted to the Machine’s Left Side Section 2
No. | Option | Description |
|---|---|---|
1 | SR4000 series output tray for banner sheet | Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR5090 or Booklet Finisher SR5100 |
2 | Output jogger | Jogs the sheets delivered to the finisher shift tray. |
3 | Booklet Finisher SR5100 | Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Copies or prints can be punched if the optional punch unit is installed on the finisher. |
4 | Finisher SR5090 | Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Copies or prints can be punched if the optional punch unit is installed on the finisher. |
5 | Interposer | Inserts cover or slip sheets into copied or printed paper. |
(3) Options Mounted to the Machine’s Left Side Section 3
No. | Option | Description |
|---|---|---|
1 | SR5000 series output tray for banner sheet | Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR5110 or Booklet Finisher SR5120. |
2 | Booklet Finisher SR5120 | Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Prints can be punched if the optional punch unit is installed on the finisher. Depending on when the machine was bought, this option may not be available. For details, contact your service representative. |
3 | Trimmer unit | Cuts the fore edge of the book block after the book block is saddle stitched. Booklet Finisher SR5120 is required in order to attach this. Depending on when the machine was bought, this option may not be available. For details, contact your service representative. |
4 | Finisher SR5110 | Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Prints can be punched if the optional punch unit is installed on the finisher. Depending on when the machine was bought, this option may not be available. For details, contact your service representative. |
5 | Finisher bridge unit | This option is required for connecting another manufacturer's finisher. |
6 | High capacity stacker | Consists of the following paper trays:
The stacker upper tray can hold up to 250 sheets of paper, and stacker tray can hold up to 5,000 sheets of paper. |
(5) Other Options
No. | Option | Description |
|---|---|---|
1 | A3/11 × 17 tray unit | You can load paper sizes up to A3 |
2 | Copy connector | Allows you to use the connect copy function. |
3 | Optional feed roller unit | You can load coated paper in the paper tray. |
4 | Carbonless paper unit | You can load carbonless paper in the two-tray wide LCT tray. |
The main unit's bypass tray cannot be used when the two-tray wide LCT is attached.
You cannot install multiple finishers simultaneously.
To use the twin interposer, Finisher SR5110 or Booklet Finisher SR5120 is required.
To use the folding unit, Finisher SR5090, Booklet Finisher SR5100, Finisher SR5110, or Booklet Finisher SR5120 is required.
To use the interposer, Finisher SR5090 or Booklet Finisher SR5100 is required.
To use the output jogger, Finisher SR5090 or Booklet Finisher SR5100 is required.
You can install the high capacity stacker only if the decurl unit is installed. To prevent blocking, the buffer pass unit is required.
Guide to Functions of the Machine’s Internal Options
Fax unit
Allows you to use the facsimile function.
Extra G3 interface unit
This lets you add a G3 fax line. A maximum of two G3 interface units can be installed.
Expansion memory
Provides 60 MB of additional memory for the facsimile function. (Standard 4 MB)
This allows you to send and receive fax documents at high resolution (Super Fine), and also to receive fax documents at high resolution (Fine). This enables you to increase the number of sheets of originals that can be stored in memory.
PostScript 3 unit
Allows you to output using Genuine Adobe PostScript 3.
OCR unit
Recognizes the scanned originals optically, and creates a PDF with the text data embedded.
IPDS unit
Allows you to print using Intelligent Printer Data Stream (IPDS).
XPS card
Allows you to directly output XPS files.
Color controller
Allows you to print by Fiery controller.
IEEE 1284 interface board
Allows you to connect to an IEEE 1284 cable.
Wireless LAN board
Allows you to communicate over wireless LAN.
File format converter
Allows you to download documents that are stored in the Document Server to the computer.
VM card
Allows you to install applications compatible with the "Embedded Software Architecture" platform.
To expand the function of this machine, various applications written in Java language can be added.
Only one of the following can be installed: IEEE 1284 interface board, wireless LAN board, or file format converter.
The Ethernet interface and wireless LAN board cannot be used simultaneously.