Tray/Paper Settings

Paper Tray Priority: Copier

Paper Tray Priority: Fax

Paper Tray Priority: Printer

Paper Tray Priority: DFE

If multiple trays are listed for Auto Paper Select, specify which tray is used first.

Specify the paper tray to be used first for Copier, Fax, and Printer respectively.

Paper Curl Correction Level

Specify a level from [Level 1 (Weak)], [[Level 2], [Level 3], [Level 4], and [Level 5 (Strong)] to correct the paper curl.

When using the decurler to correct paper curl, take care to avoid upward curling. If decurling results in upward curling, paper jams are likely when finishing processes that involve the fold function are selected.

Auto Detect: Switch Paper Size Detected Legal/Oficio

Specify which paper size the machine detects automatically, Legal or Oficio.

Double Feed Detection

Set whether to detect the double feed for each tray.

Paper Thickness Detection

Specify whether to detect paper thickness for each paper tray.

Paper Display

You can specify whether to display or hide the Paper Type keys on the document print screen of the Document Server screen. The display shown below is an example when the setting is changed from [Display] to [Hide].

Auto Tray Switching

When paper of the same size and type is loaded in two or more trays, the machine automatically shifts to the other tray when the first tray runs out of paper (Auto Tray Switching).

To enable Auto Tray Switching only when the paper of the same size and type is loaded in the same orientation, select [Without Image Rotation].

Display Bypass Tray Paper Settings

You can specify whether to display the Paper Setting screen for the bypass tray when you select the bypass tray in [Paper Size/Paper Type].

Display Paper Settings for Bypass Tray

You can specify whether to display the Paper Selection screen for the bypass tray when you load paper into the bypass tray.

Letterhead Setting

You can specify whether to use letterhead paper.

When you specify [Yes], the paper is not rotated to prevent copying onto the letterhead paper in an incorrect orientation.

Sub Paper Size

You can specify whether A4 and 8¹/₂ × 11 paper is treated as the same size.

Letterhead Setting

To print onto paper that has a fixed print side or print direction (letterhead paper, for example), make the settings for image rotation and print side correctly. Set the paper so that the paper orientation and print side are placed correctly.

Loading Orientation-fixed Paper or Two-sided Paper

Tray Setting Priority

Paper Confirmation for Bypass Tray

Specify whether to display the confirming screen of the paper size, type, and feed direction on the control panel when feeding paper from the bypass tray. If [Display] is specified, you can check the print settings for the bypass tray before printing starts.

This setting is available when Bypass Tray is set to [Driver/Command].

Paper Mismatch Alert for Bypass Tray

Specify whether to display an alert on the control panel when the bypass tray is specified as the paper source and the paper size or type does not match the specified one or no paper is loaded in the bypass tray.

This setting is available when Bypass Tray is set to [Machine Setting(s)] or [Machine Setting(s):Any Type].

Tray Setting Priority

(Continued)

Bypass Tray

Tray 1

Tray 2

Tray 3

LCT^*

Tray T1

Tray T2

Tray A

* Even if a wide LCT is mounted on the machine, [LCT] is displayed.

You can specify whether to give priority to the settings specified by the printer driver or the print command, or to the ones specified on the control panel for each tray when the machine receives print data. Only the trays attached to the machine appear.

For the bypass tray, you can specify of the following settings. For the trays 1 to 3 or Large Capacity Tray, you can specify either [Driver/Command] or [Machine Setting(s)].

Tray Setting Priority

(Continued)

Tray Setting Priority

(Continued)

Tray Switching

This is the setting item to specify when you print by specifying the tray on the printer driver. You can specify whether to switch to Auto Paper Select when the paper set in the tray is different from the settings specified on the printer driver. If the same paper is set on another tray, the paper is fed from the tray.

Extended Auto Tray Switching

This is the setting item to specify when you print by specifying the paper tray. You can specify whether to use the same paper set on another tray when the paper set in the designated tray runs out.

If Auto Tray Switching for Print Settings of emulation is disabled, printing continues by Auto Tray Switching.

Job Separation

Specify whether to shift the position of ejected sheets for each job alternately. You can sort the output sheets per job automatically when printing a large number of sheets from multiple jobs.

This setting item can be selected only on the IM C400SRF machine.

Rotate Sort: Auto Paper Continue

You can specify when you rotate the print image 180 degrees relative to the paper orientation. Use this function to print onto paper whose orientation is fixed such as a letterhead or envelope.

Rotate by 180 Degrees

You can specify when you rotate the print image 180 degrees relative to the paper orientation. Use this function to print onto paper whose orientation is fixed such as a letterhead or envelope.

Paper Tray

Specify the tray to feed paper on which received fax documents are printed. A paper tray is not specified when [Auto Select] is selected.