Others (Copier / Document Server Settings)

This section describes the settings in [Others] under [Copier / Document Server Settings].

Reserve

Setting Items	Description
Reserve Job Mode	You can set whether to reset the mode to the initial state or return to the mode in use before the reserved operation was started, when you return to the initial screen after reserved copying finishes. Default: [Reset]

Connect

Setting Items	Description
Connect Copy Key Display (This setting item is enabled only when [Copier (Classic)] is used.)	You can specify whether or not to display [Connect Copy]. If you select [Off], the key is not displayed, and the machine cannot be used as the main machine. Default: [On]

Setting Items

Description

Connect Copy Key Display

(This setting item is enabled only when [Copier (Classic)] is used.)

You can specify whether or not to display [Connect Copy]. If you select [Off], the key is not displayed, and the machine cannot be used as the main machine.

Default: [On]

Quantity

Setting Items	Description
Maximum Copy Quantity	You can specify the maximum copy quantity at one time. Default: [9999] sheet(s)
Copy Count Display	Specify which one is displayed, the number of copies made (count up) or the number of copies yet to be made (count down). Default: [Up]

Counter

Setting Items	Description
Manual Original Counter Reset	You can set whether to enable the document counter reset key. Default: [Off]
Switch Original Counter Display	You can select whether to count the two-sided originals by the number of sheets or pages. Default: [Original Sheet Counter]

Customize Function

Setting Items	Description
Customize Function: Copy (Classic Mode) (This setting item is available only when [Copier (Classic)] is used.)	You can assign frequently-used functions to the [Customize Function] keys on the Copy screen. To use the ID Card Copy function, register [ID Card Copy] to the registered program key. Default Function Key 1: [1 Sided2 Sided: Left/Right] Function Key 2: [2 Sided original2 Sided] Function Key 3: [1 SidedCombine 2 original] Function Key 4: [1 SidedCombine 4 original] Function Key 5: [Create Margin] Function Key 6: [ID Card Copy]
Customize Function: Document Server Storage	You can assign frequently-used functions for scanning documents to the [Customize Function] keys on the Document Server screen. Default Function Key 1: [2 Sided Orig. Right/Left] Function Key 2: [1 SidedCombine 2 original] Function Key 3: [1 SidedCombine 4 original] Function Key 4: [1 SidedCombine 8 original] Function Key 5: [Create Margin] Function Key 6: [Off]
Customize Function: Document Server Print	You can assign frequently-used functions for printing documents to the [Customize Function] keys on the Document Server screen. Default Function Key 1: [Duplex Print Top to Top] Function Key 2: [Duplex Print Top to Bottom] Function Key 3: [Booklet] Function Key 4: [Magazine] Function Key 5: [Off] Function Key 6: [Off]
Customize Function: Copy (Standard Mode)	You can assign frequently-used settings to the function keys on the Copy screen (Standard). Default Function Key 1: [1 sided2 sided] Function Key 2: [2 sided2 sided] Function Key 3: [1sidedComb 2orig] Function Key 4: [Staple: Top 1] Function Key 5 - 12: [Off]
Customize Function: Copy (All View Mode)	You can assign frequently-used settings to the function keys on the Copy screen (All View). To use the ID Card Copy function, register [ID Card Copy] to the registered program key. Default Function Key 1: [1 sided2 sided] Function Key 2: [2 sided2 sided] Function Key 3: [1sidedComb 2orig] Function Key 4: [1sidedComb 4orig] Function Key 5: [Create Margin] Function Key 6: [ID Card Copy] Function Key 7: [Sort] Function Key 8: [Staple: Top 1] Function Key 9 - 12: [Off]
Simplified Screen: Finishing Types (This setting item is available only when [Copier (Classic)] is used.)	You can select the finishing function keys displayed on the Simplified screen. Default Function Key 1 - 3: [Off]

Number Keys / Preview

Setting Items	Description
Switch Number Keys / Preview	You can specify whether the number keys or a preview of the current status is displayed on the right of the Copy screen (Standard/All View). Default: [Display Finished Image]