Creating a New Scan Profile
On the [Start] menu, click [Control Panel].
Click [Hardware and Sound].
You do not have to perform this step depending on the Control Panel settings.
Click [Devices and Printers].
Right-click the icon for this machine, and then click [Scan profiles...].
Click [Add...].
Configure the necessary settings for the profile.
Enter a profile name in the [Profile name:] box.
Click [Save Profile].
You can register multiple profiles. If multiple profiles are registered, the profile specified as default in the [Scan Profiles] dialog box is applied.
To specify a scan profile as the default profile, perform one of the following procedures:
In the [Scan Profiles] dialog box, click the scan profile, and then click [Set as Default].
After you create a new scan profile, in the [Add New Profile] dialog box, select the [Set this profile as default] check box.
Scan Profile Items and Settings
The following table tells you the scan profile settings that you can configure.
Item | Scan settings |
---|---|
Scanner: | Select this machine. |
Profile name: | Enter the profile name. |
Source: | Select one of the following:
|
Paper size: | If you select [Feeder (Scan one side)] or [Feeder (Scan both sides)] in [Source:], you must specify the paper size. |
Color format: | Select one of the following:
|
File type: | Select one of the following:
|
Resolution (DPI): | Specify the resolution. |
Brightness: | The setting you specify here will not be applied for scanning. |
Contrast: | The setting you specify here will not be applied for scanning. |