07: Finishing: Finisher
0701: Punch Position: With Feed
Adjust the horizontal position of the punch holes when using Finisher SR5090 or Booklet Finisher SR5100.
Press [] to move the position toward the top edge (left) relative to the paper feed direction, or [] to move it toward the bottom edge (right).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
2 Holes Type JP / EU 3 Holes Type US 4 Holes Type EU 4 Holes Type NE 2 Holes Type US 1 Hole Type JP | 0.0 | 2.0 | -2.0 | 0.5 | mm |
0702: Punch Position: Across Feed
Adjust the vertical position of the punch holes when using Finisher SR5090 or Booklet Finisher SR5100.
Press [] to move the position forward (up), or [] to move it backward (down).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
2 Holes Type JP / EU 3 Holes Type US 4 Holes Type EU 4 Holes Type NE 2 Holes Type US 1 Hole Type JP | 0.0 | 2.0 | -2.0 | 0.4 | mm |
0703: Staple Position
Adjust the vertical position of the staples when using Finisher SR5090 or Booklet Finisher SR5100.
Press [] to move the position forward (up), or [] to move it backward (down).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 B4 JIS A4 A4 B5 JIS B5 JIS 11 × 17 81/2 × 14 81/2 × 132/5 81/2 × 11 81/2 × 11 8K 16K 16K Other Paper Sizes | 0.0 | 1.0 | -1.0 | 0.5 | mm |
0704: Staple Position for Booklet
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5100.
Press [] to move the position right (across horizontally-spreading pages), or press [] to move it left.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
B4 JIS | 0.0 | 3.0 | -3.0 | 0.2 | mm |
A4 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
B5 JIS | 0.0 | 3.0 | -3.0 | 0.2 | mm |
12 × 18 | 0.0 | 1.8 | -1.8 | 0.2 | mm |
11 × 17 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
81/2 × 14 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
81/2 × 132/5 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
81/2 × 11 | 0.0 | 3.0 | -3.0 | 0.2 | mm |
8K | 0.0 | 3.0 | -3.0 | 0.2 | mm |
Other Paper Sizes | 0.0 | 1.8 | -1.8 | 0.2 | mm |
0705: Folding Position for Booklet
Adjust the horizontal position of the folding when using Booklet Finisher SR5100.
Press [] to move the position right (across horizontally-spreading pages), or press [] to move it left.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 B4 JIS A4 B5 JIS 12 × 18 11 × 17 81/2 × 14 81/2 × 132/5 81/2 × 11 8K Other Paper Sizes | 0.0 | 3.0 | -3.0 | 0.2 | mm |
A3 : 1-5 sheet(s) A3 : 6-10 sheets A3 : 11-15 sheets A3 : 16 sheets or more B4 : 1-5 sheet(s) B4 : 6-10 sheets B4 : 11-15 sheets B4 : 16 sheets or more A4 : 1-5 sheet(s) A4 : 6-10 sheets A4 : 11-15 sheets A4 : 16 sheets or more B5 : 1-5 sheet(s) B5 : 6-10 sheets B5 : 11-15 sheets B5 : 16 sheets or more 12 × 18 : 1-5 sheet(s) 12 × 18 : 6-10 sheets 12 × 18 : 11-15 sheets 12 × 18 : 16 sheets or more 11 × 17 : 1-5 sheet(s) 11 × 17 : 6-10 sheets 11 × 17 : 11-15 sheets 11 × 17 : 16 sheets or more | 0.0 | 3.0 | -3.0 | 0.2 | mm |
81/2 × 14 : 1-5 sheet(s) 81/2 × 14 : 6-10 sheets 81/2 × 14 : 11-15 sheets 81/2 × 14 : 16 sheets or more 81/2 × 132/5 : 1-5 sheet(s) 81/2 × 132/5 : 6-10 sheets 81/2 × 132/5 : 11-15 sheets 81/2 × 132/5 : 16 sheets or more 81/2 × 11 : 1-5 sheet(s) 81/2 × 11 : 6-10 sheets 81/2 × 11 : 11-15 sheets 81/2 × 11 : 16 sheets or more 8K : 1-5 sheet(s) 8K : 6-10 sheets 8K : 11-15 sheets 8K : 16 sheets or more Other Paper Sizes: 1-5 sheet(s) Other Paper Sizes: 6-10 sheets Other Paper Sizes: 11-15 sheets Other Paper Sizes: 16 sheets or more | 0.0 | 3.0 | -3.0 | 0.2 | mm |
0706: Folding Speed for Booklet
Specify the folding speed for booklets when using the Booklet Finisher SR5100.
You can adjust the paper folding strength by changing the folding speed for booklet folding.
By decreasing the folding speed, you can increase the paper folding strength.
Setting Items | Selection | Default Value |
---|---|---|
A3 B4 JIS A4 B5 JIS 12 × 18 11 × 17 81/2 × 14 81/2 × 132/5 81/2 × 11 8K Other Paper Sizes | High Middle Low | High |
0801: Staple Position Across Feed 1
Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher SR5120.
Press [] to move the stapling position away from the side edge of the sheet or [] to move it toward the edge.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 B4 JIS A4 A4 B5 JIS B5 JIS 11 × 17 81/2 × 14 81/2 × 132/5 81/2 × 11 81/2 × 11 8K 16K 16K Other Paper Sizes | 0 | 2 | -2 | 0.1 | mm |
0802: Staple Position Across Feed 2
Adjust the vertical position of the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120.
Press [] to move the two stapling positions away from the center and each other or [] to move them toward each other.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 | 0 | 115 | -14.5 | 0.1 | mm |
B4 JIS | 0 | 75 | -14.5 | 0.1 | mm |
A4 | 0 | 115 | -14.5 | 0.1 | mm |
A4 | 0 | 28 | -14.5 | 0.1 | mm |
B5 JIS | 0 | 75 | -14.5 | 0.1 | mm |
B5 JIS | 0 | 0 | -14.5 | 0.1 | mm |
11 × 17 | 0 | 98 | -14.5 | 0.1 | mm |
81/2 × 14 | 0 | 34 | -14.5 | 0.1 | mm |
81/2 × 132/5 | 0 | 34 | -14.5 | 0.1 | mm |
81/2 × 11 | 0 | 98 | -14.5 | 0.1 | mm |
81/2 × 11 | 0 | 34 | -14.5 | 0.1 | mm |
8K | 0 | 85 | -14.5 | 0.1 | mm |
16K | 0 | 85 | -14.5 | 0.1 | mm |
16K | 0 | 12 | -14.5 | 0.1 | mm |
Other Paper Sizes | 0 | 115 | -14.5 | 0.1 | mm |
0803: Staple Position: With Feed
Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120.
Press [] to move the stapling position away from the trailing edge of the sheet or [] to move it toward the edge.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
A3 B4 JIS A4 A4 B5 JIS B5 JIS 11 × 17 81/2 × 14 81/2 × 132/5 81/2 × 11 81/2 × 11 8K 16K 16K Other Paper Sizes | 0 | 2 | -2 | 0.1 | mm |
0813: Punch Position: Across Feed
Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.
Press [] to move the position forward (up), or [] to move it backward (down).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
2 Holes Type JP / EU 3 Holes Type US 4 Holes Type EU 4 Holes Type NE 2 Holes Type US | 0.0 | 2.0 | -2.0 | 0.5 | mm |
0814: Punch Position: With Feed
Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.
Press [] to move the position toward the top edge (left) relative to the paper feed direction, or [] to move it toward the bottom edge (right).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
2 Holes Type JP / EU 3 Holes Type US 4 Holes Type EU 4 Holes Type NE 2 Holes Type US | 0.0 | 4.0 | -4.0 | 0.5 | mm |
0825: Staple Position for Booklet
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120.
Press [] to move the position left, or press [] to move it right on the open booklet.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
13 × 191/5 13 × 19 123/5 × 191/5 123/5 × 181/2 13 × 18 SRA3 12 × 18 A3 B4 JIS SRA4 226 × 310mm 310 × 432mm A4 B5 JIS 11 × 17 81/2 × 132/5 81/2 × 14 81/2 × 11 8K 16K Other Paper Sizes | 0.0 | 1.0 | -1.0 | 0.1 | mm |
0826: Folding Position for Booklet
Adjust the horizontal position of the folding when using Booklet Finisher SR5120.
Press [] to move the position left or press [] to move it right on the open booklet.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
13 × 191/5 13 × 19 123/5 × 191/5 123/5 × 181/2 13 × 18 SRA3 12 × 18 A3 B4 JIS SRA4 226 × 310mm 310 × 432mm A4 B5 JIS 11 × 17 81/2 × 132/5 81/2 × 14 81/2 × 11 8K 16K Other Paper Sizes | 0.0 | 1.0 | -1.0 | 0.1 | mm |
0828: Set Number of Folds for Booklet
Specify the number of booklet folds to be performed when using Booklet Finisher SR5120.
You can adjust the paper folding strength by changing the number of folds per the booklet.
When you select "0", the default value, the finisher folds the booklet according to the number of sheets in the booklet, as shown below.
1–6 sheets: 1 time
7–10 sheets: 2 times
11–30 sheets: 6 times
The value set here is added to the default values. Set a negative value to reduce the number of times the finisher folds booklets.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
Number of Folds for Booklet | 0 | 6 | -6 | 1 | time(s) |
0838: Accuracy Priority for Stapling
Set the accuracy priority for stapling.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Item | Values | Default Value |
---|---|---|
Accuracy Priority for Stapling | Speed Priority Accuracy Priority | Speed Priority |
0839: Accuracy Priority for Booklet
Set the accuracy priority for a booklet.
This function can be used with Booklet Finisher SR5120.
Setting Item | Values | Default Value |
---|---|---|
Accuracy Priority for Booklet | Speed Priority Accuracy Priority | Speed Priority |
0840: Staple Tray: Rib Installed Mode to Strengthen Paper
Set the operation when the Paper Strengthening Rib is installed to Staple Tray.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Before you set [Staple Tray: Rib Installed Mode to Strengthen Paper] to [On], attach the paper strengthening ribs.
Setting Item | Values | Default Value |
---|---|---|
Staple Tray: Rib Installed Mode to Strengthen Paper | Off On | Off |