Custom Paper Settings

Registration No.

Specify a registration number for custom paper.

Paper Brand

Displays brand name and data version of the custom paper registered from the master library.

Brand name and data version is displayed only for the custom paper registered from the master library.

Manufacturer

Displays the manufacturer's name. Manufacturer's name is displayed only for the custom paper registered from the master library.

Custom Paper Name

Specify the name of the custom paper using up to 38 characters.

You cannot use the name of a registered custom paper.

Paper Size

Select the paper's size from the regular sizes or specify a [Custom Size].

You can specify a custom size between 90.0 and 330.2 mm (3.55 and 13.00 inches) vertically, and between 139.7 and 1260.0 mm (5.50 and 49.60 inches) horizontally.

To use paper that has a horizontal length between 487.8 and 1260.0 mm (19.20 and 49.60 inches) with the bypass tray, install the multi bypass banner sheet tray or banner sheet guide tray.

To use paper having a horizontal length between 487.8 mm and 700 mm (19.20 and 27.55 inches) with the two-tray wide LCT, the banner sheet tray of the two-tray wide LCT must be attached.

To use paper having a horizontal length between 487.8 mm and 700 mm (19.20 and 27.55 inches) with the multi bypass tray (Tray A), the banner sheet tray of multi bypass tray (Tray A) must be attached.

Paper Weight

Specify the weight (g/m²) of the custom paper. Specify the paper weight between [Paper Weight 1] and [Paper Weight 9].

For details about the relationship between the paper weight and ream weight, see "Paper weight", Recommended Paper Sizes and Types. Paper weight can also be scanned using the Media Identification Unit.

Paper Thickness

Specify the thickness (µm) of the custom paper. You can also scan paper thicknesses using the Media Identification Unit.

Paper Type

Specify the type of the custom paper.

Coated Paper Type

Specify whether or not the custom paper is coated.

Paper Color

Specify the color of the custom paper.

Prepunched or Not

Specify whether or not the custom paper is punched.

Textured or Not

Specify whether or not the custom paper is embossed.

Apply Duplex

Specify whether the duplex function is enabled for the custom paper.

Apply Auto Paper Select

Specify whether the auto paper select function is enabled for the custom paper.

Advanced Settings

Specify the advanced settings for the paper.

Only the machine administrator can specify these settings.

Advanced settings can be changed even if the selected custom paper is assigned to a paper tray.

For details, contact your machine administrator.

You can change settings for [Registration No.], [Custom Paper Name], [Paper Size], [Apply Duplex], and [Apply Auto Paper Select] if a custom paper has already been registered using the master library.

Settings that you can change depend on the following:

Settings	Custom papers that have been registered using the master library (listed with an icon or)	Custom papers that have been registered by specifying paper types and weight (listed with no icons)
Registration No.	Available	Available
Paper Brand	Not Available	-
Manufacturer	Not Available	-
Custom Paper Name	Available	Available
Paper Size	Available	Available
Paper Weight	Not Available	Available
Paper Thickness	Not Available	Available
Paper Type	Not Available	Available
Coated Paper Type	Not Available	Available
Paper Color	Not Available	Available
Prepunched or Not	Not Available	Available
Textured or Not	Not Available	Available
Apply Duplex	Available	Available
Apply Auto Paper Select	Available	Available
Advanced Settings	Available^*1	Available^*1

*1 Can be changed only by the machine administrator.

Note

Before changing these settings, check that the size and type of your paper are compatible with the paper tray that you want to load the paper in. Tray compatibility depends on the paper's size and type.
When you use custom size paper, we recommend using paper that has a horizontal length of 700.0 mm (27.55 inches) or less.