Bypass Tray
This section explains the paper tray settings in the [Bypass Tray] menu under [Tray Paper Settings].
Multi bypass tray (Tray A)
This section explains the paper tray settings for multi bypass tray (Tray A).
Paper Type
Plain Paper
Recycled Paper
Yellow
Green
Blue
Ivory
Orange
Pink
Red
Gray
Letterhead
Translucent Paper
Preprinted Paper
Transparency
Envelope
Prepunched Paper
Textured Paper
Synthetic Paper
Tab Stock
Default: [Plain Paper]
If [Tab Stock] is selected, configure [Tab Position Shift] as required.
Paper Weight
Paper Weight 1 (52.3–65.9g/m2)
Paper Weight 2 (66–80.9g/m2)
Paper Weight 3 (81–100.9g/m2)
Paper Weight 4 (101–127.4g/m2)
Paper Weight 5 (127.5–150g/m2)
Paper Weight 6 (150.1–216g/m2)
Default: [Paper Weight 3 (81.0–100.9g/m2)]
Apply Duplex
Yes
No
Default: [Yes]
Duplex printing is automatically disabled if you select [Translucent Paper], [Envelope], or [Tab Stock] for [Paper Type].
Apply Auto Paper Select
Yes
No
Default: [Yes]
Paper Size
Auto Detect, A3
, A4
, A5, A6, B4 JIS, B5 JIS, B6 JIS,
SRA3, SRA4, 310 × 432 mm, 226 × 310 mm, C5 Env, C6 Env,
DL Env, 13 × 191/5, 13 × 19, 13 × 18, 123/5 × 191/5, 123/5 × 181/2, 12 × 18, 11 × 17, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 14, 81/2 × 132/5,
81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2,
51/2 × 81/2, 41/5 × 51/2, 8K, 16K, Custom Size
Default: [Auto Detect]
Specify the paper size with the number keys when you select [Custom Size]. The paper sizes that can be used differ depending on the machine's configuration.
When the banner sheet tray of multi bypass tray (Tray A) is not installed:
Vertical: 100.0–330.2 mm (3.94–13.00 inches), Horizontal: 139.7–487.7 mm (5.50–19.20 inches)
When the banner sheet tray of multi bypass tray (Tray A) is installed:
Vertical: 210.0–330.2 mm (8.27–13.00 inches), Horizontal: 139.7–700.0 mm (5.50–27.55 inches)
The lock mark (
) is displayed next to the paper tray if [Apply Auto Paper Select] is not enabled.The maximum weight of paper that can be loaded into the multi bypass tray (Tray A) is 216.0 g/m2 (79.9 lb. Cover).
Bypass Tray
This section explains the paper tray settings for the Bypass Tray.
Paper Type
Plain Paper
Recycled Paper
Yellow
Green
Blue
Ivory
Orange
Pink
Red
Gray
Letterhead
Label Paper
Translucent Paper
Preprinted Paper
Transparency
Envelope
Prepunched Paper
Textured Paper
Metallic/Pearl Paper
Clear File Folder
Synthetic Paper
Tab Stock
Coated: High Gloss
Coated: Matte
Coated: Glossy
Default: [Plain Paper]
If [Tab Stock] is selected, configure [Tab Position Shift] as required.
If [Coated: Matte] or [Coated: Glossy] is selected, configure [Gloss Control] as required. For gloss control, take note of the followings.
Make adjustment by 1 step each time.
If you decrease the value, a fusing error may occur.
If you increase the value excessively, a printing error may occur.
Depending on the paper, the gloss may not change.
Paper Weight
Paper Weight 1 (52.3–65.9g/m2)
Paper Weight 2 (66–80.9g/m2)
Paper Weight 3 (81–100.9g/m2)
Paper Weight 4 (101–127.4g/m2)
Paper Weight 5 (127.5–150g/m2)
Paper Weight 6 (150.1–216g/m2)
Paper Weight 7 (216.1–256g/m2)
Paper Weight 8 (256.1–300g/m2)
Paper Weight 9 (300.1–360g/m2)
Default: [Paper Weight 3 (81–100.9g/m2)]
Apply Duplex
Yes
No
Default: [Yes]
Duplex printing is automatically disabled if you select [Label Paper], [Translucent Paper], [Transparency], [Envelope], [Clear File Folder], or [Tab Stock] for [Paper Type].
Apply Auto Paper Select
Yes
No
Default: [Yes]
Paper Size
Auto Detect, A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
SRA3, SRA4, 310 × 432 mm, 226 × 310 mm, 81/2 × 132/5, C5 Env, C6 Env, DL Env, 13 × 191/5, 13 × 19,
13 × 18, 123/5 × 191/5, 123/5 × 181/2, 12 × 18, 11 × 17, 11 × 15, 11 × 14,
10 × 15, 10 × 14, 8 × 10, 81/2 × 14, 81/2 × 13, 81/2 × 11,
81/4 × 14, 81/4 × 13, 8 × 13, 71/4 × 101/2, 51/2 × 81/2,
41/8 × 91/2, Custom Size
Default: [Auto Detect]
You can specify a custom size between 90.0 and 330.2 mm (3.55 and 13.00 inches) vertically, and between 139.7 and 1260.0 mm (5.50 and 49.60 inches) horizontally.
For details about auto detectable paper sizes, see Recommended Paper Sizes and Types.
When you use custom size paper, we recommend using paper that has a horizontal length of 700.0 mm (27.55 inches) or less.
To use paper that has a horizontal length between 487.8 and 1260.0 mm (19.20 and 49.60 inches), install the multi bypass banner sheet tray or banner sheet guide tray.
The lock mark (
) is displayed next to the paper tray if [Apply Auto Paper Select] is not enabled.