Remote Communication Gate Proxy Server
Configuration > @Remote > Remote Communication Gate Proxy Server

Use this page to configure the settings for starting the @Remote service. This setup is configured by your service representative.
Ask your sales representative for details.

Note

• The administrator can change settings on this page.

Remote Communication Gate Proxy Server

Select to use a Proxy Server for Internet connection.
To use a Proxy Server, select Active, and then configure the following settings.
(When Inactive is selected, you do not need to configure the following settings.)

Proxy Address

Enter the host name or IP address of the proxy server.

Port Number

Enter the port number of the proxy server.
Enter from 0 to 65535. The default is 8080.

User Name

Enter the user name used when logging in to the proxy server.
You can enter up to 31 alphanumeric characters.

Password

Enter the password for logging in to the proxy server.
You can enter up to 31 alphanumeric characters.

Confirm Password

Re-enter the new password to confirm it.
The password entered here must be the same as the one entered earlier in Password.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.