Network Security
Configuration > Security >
Network Security
Configure SSL/TLS security levels.
Note
- The administrator can change settings on this page.
- To set SSL/TLS communication to Active or Inactive, use the SSL/TLS page.
SSL/TLS version
Specify the version of SSL/TLS that you want to use.
Note
- If the SSL/TLS version settings are all set to Inactive when SSL/TLS (IPv4 and/or IPv6) is enabled, SSL/TLS communication will fail.
TLS1.0
Specify whether TLS1.0 is active or inactive.
SSL3.0
Specify whether SSL3.0 is active or inactive.
Encrypted Communication Settings
Select the key lengths of the encryption algorithms to use for SSL/TLS communication.
Note
- Depending on the settings for SSL/TLS version, available settings may vary.
- If your Web browser does not support all of the selected encryption key lengths, you will not be able to access the machine using that browser. Check the specification of your Web browser.
- SSL/TLS communication will fail if you do not select at least one encryption key length when SSL/TLS (IPv4 and/or IPv6) is enabled.
Buttons
Refresh
Click to update the currently displayed information.
Note
- Before making the settings, click Refresh to obtain the machine's current status.
OK
Click to apply the settings.
Cancel
Click to cancel the settings.