IPv4
Configuration > Network > IPv4

Use this page to make settings for printing using IPv4.

Note

• If an item is flagged by an asterisk, it means that the value obtained from the DHCP server has priority when using DHCP. The value currently in use appears in parentheses.
• The administrator can change settings on this page.

IPv4

Specify whether IPv4 is active or inactive.

Note

• If IPv4 is already in use, the setting cannot be changed from Active to Inactive. For example, if your browser uses IPv4 to connect to the device, Inactive cannot be selected.

Ethernet

Host Name

Enter the host name you want to set for the network interface board, using up to 31 characters. The default is RNP, followed by the MAC address of the active interface board. If you change the name to other than the default, the new name cannot begin with "RNP" or "rnp".

Note

• A hyphen can be used as part of the host name. However, hyphens cannot be used at the start or end of a host name or entered consecutively ("--", etc.).

DHCP

Select Active to use the DHCP server to automatically configure the network settings. Select Inactive to manually configure the network settings.

Notify Host Name to DHCP Server

Specify whether or not to notify the host name to the DHCP server.

DHCP Server

Displays the IP address of the DHCP server.

Lease Time

Displays the lease time of the DHCP server.

Domain Name

Enter the name of the domain to which the device belongs, using up to 63 alphanumeric characters. Spaces cannot be used.

Use Domain Name

Specify whether or not to use the domain name obtained from the DHCP server.

IPv4 Address*

Enter the IPv4 address of the network interface board.
At DHCP operation, the address obtained from the DHCP server is used.

Subnet Mask*

Enter the sub-net mask of the network interface board. The sub-net mask is a part of the IP address used as a network address.
When using DHCP, the sub-net mask obtained from the DHCP server is used.

AutoIP

Specify whether or not to activate the AutoIP function.

Details

Default Gateway Address*

Enter the default gateway address.
The default gateway address is the IP address of the host or router used as the gateway when communicating (printing or exchanging information) with a computer on another network.
When using DHCP, the default gateway address obtained from the DHCP server is used. If the address cannot be obtained from the DHCP server, the default gateway address set for the device is used.

DNS Server 1*

Enter the DNS server address on the network.
When DHCP is used, the primary DNS server IP address obtained from the DHCP server appears.

DNS Server 2*

Enter the DNS server address on the network.
When DHCP is used, the secondary DNS server IP address obtained from the DHCP server appears.

DNS Protocol Priority

Select a priority protocol for DNS name resolution.

LPR, DIPRINT

Specify whether each protocol is active or inactive.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.