System
Device Management >Configuration > Device Settings > System

Configure settings for device name, display panel language and priority tray.

Note

General Settings

Device Name

Enter the device name, using up to 31 characters.

Note

• The device name is different from the host name entered in the Host Name box on the Configuration: Network: IPv4 or Configuration: Network: IPv6 page.

Comment

Enter a note about the machine, using up to 31 characters.

Location

Enter the device location, using up to 32 characters.

Spool Printing

Specify whether Spool Printing is active or inactive.
This appears only when Spool Printing is supported by the machine.

Note

• When Active is selected, you can select Job - Printer - Spool Printing. This displays the Spool Printing Job List page.
  When Inactive is selected, the Spool Printing item does not appear on the Job page.
• Spool printing is active or inactive when you click OK on this page. Job - Printer - Spool Printing is displayed or hidden when the Web browser restarts after the setting is applied.

Protect Printer Display Panel

Specify whether to restrict access from the printer control panel, and if yes, select a protection level.
If protection is enabled, changing control panel items is not possible.
This appears only when printer function is supported by the machine.

Note

• If you select Level 1 or Level 2, the protection level that is applied is the same as that specified for Level 1 or Level 2 of the Menu Protect setting in the printer's initial settings, which are configured using the machine control panel.
• For details about setting Menu Protect, see the operating instructions provided with the machine.
• This item appears only when you are logged in as Machine Administrator.

Display Panel Language

Select the language(s) for the device's control panel.

Note

• Available languages depend on machine type.
• This item does not appear if the device has only one language available.
• To apply the language selected, turn the machine off and then back on, or click OK on the Reset the Machine page.

Display IP Address on Device Display Panel

Specify whether to display the device IP address on its control panel.

Note

• The IP address display position or order on the control panel varies depending on the device model.
• This is displayed only if/when supported by the machine.

Compatible ID

You can enable or disable the Compatible ID setting.

Prohibit printing stored files from Web Image Monitor

Specify whether or not to allow users to print stored files from Web Image Monitor.

Note

• The Print button may not appear if Prohibit is set for Prohibit printing stored files from Web Image Monitor on the following pages:
  • Print Job List

Silent Mode

Specify whether or not to use silent mode.
Selecting On reduces the operation sound by printing slowly.

Remote Main Power On

Specify whether or not to enable the Remote Main Power On function.
This function allows you to turn on the main power of the machine remotely by sending the Wake-on-LAN (WOL) packet.

Ready State After Printing

You can specify the state of the printer when printing documents during Sleep Mode.
Selecting Control Panel On changes the printer mode to standby after printing.
Selecting Cntrl Panel Off (EnSvg) returns the printer to Sleep Mode after printing.

Shift to Main Power-Off When Network Disconnected

Specify whether or not to turn the main power off if the network is disconnected.

Paper Tray Priority

Printer

Select the priority tray you want to use for the printer function.

Note

• Available input trays depend on machine type or options installed.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.