Timer
Device Management > Configuration > Device Settings > Timer

Configure settings to control the functions supported by the machine.

Note

• Settings on this page can be changed by the following administrators and users:
  • Machine Administrator
  • Login users (all items), if:
    User authentication is enabled on the device and users are permitted to make changes to administrator's setting items.
• Some items may not appear depending on machine type or configuration.

Sleep Mode Timer

The sleep mode timer automatically turns off the device when it is left idle for a specified period.
Enter the time period that the device must be idle before switching to sleep mode. Enter a value between 1 and 60 (minutes).

System Auto Reset Timer

Specify whether to reset the device to its initial status (as when the device was first turned on), when left idle for a specified period.
If you select On, you must then enter the time before reset to the initial status. Enter a value between 10 and 999 (seconds).
If you select Off, device settings remain unchanged until the device is turned off.

Copier Auto Reset Timer

Specify whether to reset the copier setting to their initial status (as when first turned on), when the copier function is left idle for a specified period.
If you select On, you must then enter the time before reset to initial status. Enter a value between 10 and 999 (seconds).
If you select Off, device settings remain until turned off.

Fax Auto Reset Timer

Specify the time before resetting the device's fax settings to their initial status (as when first turned on) when the fax function is idle for a specified period.
If you select On, you must then enter the time before reset to initial status. Enter a value between 30 and 999 (seconds).
If you select Off, device settings remain until turned off.

Note

• If the cloud fax function is enabled, this function will not be available.

Scanner Auto Reset Timer

Specify whether to reset the device's scanner settings to their initial status (as when first turned on), when the scanner function is idle for a specified period.
If you select On, you must then enter the time before reset to initial status. Enter a value between 10 and 999 (seconds).
If you select Off, device settings remain until turned off.

Printer Auto Reset Timer

Specify whether to reset the device's printer settings to their initial status (as when first turned on), when the printer function is idle for a specified period.
If you select On, you must then enter the time before reset to initial status. Enter a value between 10 and 999 (seconds).
If you select Off, device settings remain until turned off.

Auto Logout Timer

Select this to automatically log out the login user from the control panel if he/she does not use the machine for a specified period.
If you select On, you must then enter the time period that elapses before the user is automatically logged out. Enter seconds between 10 and 999 (seconds).
If you select Off, the user remains logged in until he/she manually logs out.

Fusing Unit Off Mode On/Off

This function automatically turns the fusing unit's heater off when the device is left idle for a specified period.
Specify whether or not to put the device into fusing unit off mode.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.