System
Device Management >Configuration > Device Settings >
System
Configure settings for device name, output tray, and priority tray.
Note
- Settings on this page can be changed by the following administrators and users:
- Network Administrator (Device Name, Comment, and Location)
- Machine Administrator(Display Panel Language, Spool Printing, Protect Printer Display Panel, Energy Saver Key to Change Mode, Display IP Address on Device Display Panel, Media Slot Use, Compatible ID, Prohibit printing stored files from Web Image Monitor and tray settings)
- Login users (all items except Protect Printer Display Panel), if:
User authentication is enabled on the device and users are permitted to make changes to administrator's setting items.
- Some items may not appear depending on machine type or configuration.
General Settings
Device Name
Enter the device name, using up to 31 characters.
Note
- The device name is different from the host name entered in the Host Name box on the Configuration: Network: IPv4 or Configuration: Network: IPv6 page.
Comment
Enter a note about the machine, using up to 31 characters.
Location
Enter the device location, using up to 32 characters.
Display Panel Language
Select the language(s) for the device's control panel.
Note
- Available languages depend on machine type.
- To apply the language selected, turn the machine off and then back on, or click OK on the Reset the Machine page.
Spool Printing
Specify whether Spool Printing is active or inactive.
This appears only when Spool Printing is supported by the machine.
Note
- When Active is selected, you can select Job - Printer - Spool Printing.
This displays the Spool Printing Job List page.
When Inactive is selected, the Spool Printing item does not appear on the Job page. - Spool printing is active or inactive when you click OK on this page. Job - Printer - Spool Printing is displayed or hidden when the Web browser restarts after the setting is applied.
Protect Printer Display Panel
Specify whether to restrict access from the printer control panel, and if yes, select a protection level.
If protection is enabled, changing control panel items is not possible.
This appears only when printer function is supported by the machine.
Note
- If you select Level 1 or Level 2, the protection level that is applied is the same as that specified for Level 1 or Level 2 of the Menu Protect setting in the printer's initial settings, which are configured using the machine control panel.
- For details about setting Menu Protect, see the operating instructions provided with the machine.
- This item appears only when you are logged in as Machine Administrator.
Energy Saver Key to Change Mode
Select a machine mode when you press the "Energy Saver" key on the machine's control panel.
Low Power Mode
In this mode, the machine will return to the normal mode quicker than Sleep Mode, but the power consumption will be increased.
Sleep Mode
In this mode, the machine will return to the normal mode slower than Low Power Mode, but the power consumption will be reduced.
Display IP Address on Device Display Panel
Specify whether to display the device IP address on its control panel.
Note
- The IP address display position or order on the control panel varies depending on the device model.
- This is displayed only if/when supported by the machine.
Media Slot Use
Specify whether or not to allow users to use the machine's media slot.
Note
- This is displayed only if/when supported by the machine.
Print from Memory Storage Device
Specify whether or not to allow users to print the data from a USB flash memory device or an SD card using the media slot.
Compatible ID
You can enable or disable the Compatible ID setting.
Prohibit printing stored files from Web Image Monitor
Specify whether or not to allow users to print stored files from Web Image Monitor.
Note
- The Print button may not appear if Prohibit is set for Prohibit printing stored files from Web Image Monitor on the following pages:
Output Tray
Printer
Select the output tray you want to use for the printer function.
Note
- Available output trays depend on machine type or options installed.
- The output tray selection for individual functions does not appear if the machine has only one tray installed.
Paper Tray Priority
Printer
Select the priority tray you want to use for the printer function.
Paper Tray Priority is the tray selected immediately after the printer is turned on, and when Auto Select is chosen as the paper source in a job.
Note
- Available input trays depend on machine type or options installed.
Buttons
Refresh
Click to update the currently displayed information.
Note
- Before making the settings, click Refresh to obtain the machine's current status.
OK
Click to apply the settings.
Cancel
Click to cancel the settings.