Bonjour
Device Management > Configuration > Network > Bonjour

Configure settings related to Bonjour (Rendezvous).
Some items are for reference only and cannot be changed.

Note

• Bonjour (formerly known as Rendezvous) was launched upon the release of Mac OS X 10.4.
• Settings configured here relate to the following interfaces:
  Ethernet and wireless LAN.
• Settings on this page can be changed by the following administrators and users:
  • Network Administrator
  • Login users
    User authentication is enabled on the device and users are permitted to make changes to administrator's setting items.

Bonjour

Specify whether Bonjour for the device's interface boards is active or inactive.

Ethernet/Wireless LAN/Ethernet + Wireless LAN

Ethernet, Wireless LAN, or Ethernet + Wireless LAN appears depending on the interface board installed.

Local Hostname

Displays the Bonjour host name.
This indicates the host name of the network interface board or wireless LAN board, to which ".local" is appended.

Note

• The Bonjour name may consist of the IPv4 host name followed by a hyphen and number, for example: IPHostName-2.local. If two or more devices with the same host name are connected to the same LAN, a sequence number is appended to the host name.

Details

These settings are common to the network interface board and wireless LAN board.

Computer Name

Enter a name to identify the device using Bonjour, using up to 63 characters.
The default is the manufacturer's name followed by the device model.

Location

Enter the device location, using up to 32 characters. This item is linked to Location on the Device Management - Configuration - Device Settings - System page.

Print Order Priority

DIPRINT, LPR, IPP

Enter the priority for each protocol type, between 0 and 99. The lower the value, the higher the priority.
The default is 10 for DIPRINT, 20 for LPR, and 30 for IPP.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.