IEEE 802.1X
Device Management > Configuration > Security > IEEE 802.1X

Configure settings for information necessary for IEEE 802.1X authentication, when WPA2 is selected for WPA2 Authentication Method on the Wireless LAN Settings page, or when Active is selected for Ethernet Security on the Interface Settings page.

Note

User Name

Enter the user name used with the Extensible Authentication Protocol (EAP). You can enter up to 31 alphanumeric characters.
EAP is the authentication protocol used for IEEE 802.1X authentication.

Domain Name

Enter the domain name used for the RADIUS server authentication using either an FQDN (Fully Qualified Domain Name) or NetBIOS name. You can enter up to 64 alphanumeric characters. Note that domain names cannot include "at" signs (@) or backslashes (\).

EAP Type

Select the EAP authentication type.

IEEE 802.1X Client Certificate Status

Displays the status of the device certificate specified for wireless LAN connection in Certification on the Device Certificate page.

Password

If EAP Type is set to LEAP, EAP-TTLS, or PEAP, click Change to enter a password set on the RADIUS server.

For details about the Change Password page

Note

Phase 2 User Name

If EAP Type is set to EAP-TTLS or PEAP, click Change to enter a user name set on the RADIUS server.

For details about the Change Phase 2 User Name page

Phase 2 Method (EAP-TTLS)

If EAP Type is set to EAP-TTLS, select the phase 2 method.

Phase 2 Method (PEAP)

If EAP Type is set to PEAP, select the phase 2 method.

Authenticate Server Certificate

If EAP Type is set to other than LEAP, select whether to enable or disable authentication for the authentication server.

Trust Intermediate Certificate Authority

If EAP Type is set to other than LEAP, select whether to trust the certificate signed by the intermediate CA.

Note

Server ID

If EAP Type is set to other than LEAP, enter the authentication server ID. You can enter up to 128 alphanumeric characters.

Note

Permit Sub-domain

Select whether to enable authentication even if the sub-domain name is different.
For example: if you select On, both "a.jp.xyz2.com" and "a.uk.xyz2.com" domains will be authenticated.

Note

Buttons

To Top of the Page

Refresh

Click to update the currently displayed information.

Note

OK

Click to apply the settings.

Cancel

Click to cancel the settings.

 

To Top of the Page