LDAP Server (Setup)
Device Management > Configuration > Device Settings > LDAP Server > LDAP Server (Setup)

Register and update LDAP servers.

Identification Name

Enter the LDAP server's name using up to 20 characters.

Server Name

Enter the LDAP server's host name or IP address using up to 128 characters.

Search Base

Enter the position within the LDAP directory's structure from which to start user searches. Use up to 128 alphanumeric characters.
Example: dc=my-domain.com

Port Number

Enter the port number used to connect to the LDAP server. Use a number from 1 to 65535. The default is 389.

SSL

Select whether or not to use SSL to communicate with the LDAP server. If you select On, communication between machine and LDAP server is SSL encrypted. If you select Off, communication is not encrypted.

Note

Authentication

Select to perform authentication when the machine connects to the LDAP server.

Off

No authentication.

Cleartext Authentication

User name and password authentication.

Digest Authentication

User name, password, and device certification authentication.

Kerberos Authentication

User name, password, and device certification authentication.

Note

  • Set your user name and password using User Name and Password on this page.

User Name

Enter your LDAP server login user name. Use up to 128 alphanumeric characters.

Note

Password

Click Change to update the logged-in user's password.

Note

For details about the Change Password page

Realm Name

If you selected Kerberos Authentication for Authentication, you must specify the Kerberos realm for user authentication.

Note

Japanese Character Code Set

Select a character code set for the LDAP server to use.

Connection Test

Click Start to see whether or not connection to the LDAP server is possible using the settings configured.

Search Conditions

To Top of the Page

Specify which items of user information to search for via LDAP search.

Identification Name

Enter an attribute type by which the user name can be distinguished. Use up to 64 alphanumeric characters.
Default: "cn".

Email Address

Enter an attribute type by which the user email address can be distinguished. Use up to 64 alphanumeric characters.
Default: "mail".

Fax Number

Enter an attribute type by which the user fax number can be distinguished. Use up to 64 alphanumeric characters.
Default: "facsimileTelephoneNumber".

Company Name

Enter an attribute type by which the user's company (or organization) name can be distinguished. Use up to 64 alphanumeric characters.
Default: "o".

Department Name

Enter an attribute type by which the user's department name can be distinguished. Use up to 64 alphanumeric characters.
Default: "ou".

Search Options

To Top of the Page

Specify other condition for LDAP search, if required. For example, to search for information based on user's employee number, enter "employeeNo" in the Attribute box, and then enter "Employee No." in the Key Display box.

Attribute

Enter an attribute type by which the user can be distinguished. Use up to 64 alphanumeric characters.

Key Display

Enter the name shown on the machine's control panel, which is used for LDAP search to search a user based on the attribute type specified in the Attribute box. Use up to 20 alphanumeric characters.

Buttons

To Top of the Page

OK

Click to apply the settings.

Cancel

Click to cancel the settings and return to the LDAP Server page.

 

To Top of the Page