Select Tray
Print Job/Stored File > Document Server > Document Server >
List of Files to Print > Select Tray
You can configure settings for the paper tray used for printing files stored in the Document Server. This page appears when you click Select Tray on the List of Files to Print page.
Note
- Options listed for Paper Tray and Bypass Tray Paper depend on device type, device configuration, and paper tray settings.
Paper Tray
Select one of the following:
Auto Paper Size Select
Paper is automatically selected based on file page size.
Tray 1 to Tray n, Bypass Tray
These are the machine's input trays. The status icon, paper size, and paper orientation are displayed to the right of the input tray name.
Note
- Click Paper Type to check the type of paper loaded.
- Status icons are the same as those displayed on the Status page.
Bypass Tray Paper
Select the paper to set in the bypass tray.
Note
- This is displayed only if supported by the machine.
Paper Size
Off
Select this if you do not want to specify paper for the tray.
Regular Size 
Select this when setting paper vertically on the tray. Specify the paper size using the drop down menu to the right.
Regular Size 
Select this when setting paper horizontally on the tray. Specify the paper size using the drop down menu to the right.
Custom Size
Select this to set custom size paper on the tray. Using the diagram displayed on the page, enter the vertical and horizontal lengths of the paper.
Note
- Specific length and width ranges depend on the device type. If the specified size is out of range, it is automatically corrected to the maximum or minimum value when OK is clicked.
Special Paper
To print on special paper using the tray, select the paper type.
Buttons
OK
Click to save the settings and return to the List of Files to Print page.
Current settings are displayed under the Select Tray button on the List of Files to Print page.
Cancel
Click to cancel the settings and return to the List of Files to Print page.