Remote Communication Gate Proxy Server
Device Management > Configuration > @Remote > Remote Communication Gate Proxy Server

Configure settings for Internet connection of the device.
These settings are necessary for updating the firmware of the Remote Communication Gate (RC Gate).

Note

• Settings on this page can be changed by the following administrator:
  • Machine Administrator

Remote Communication Gate Proxy

Remote Communication Gate Proxy Server

Select to use a Proxy Server for Internet connection.
To use a Proxy Server, select Enable, and then configure the following settings.
(When Disable is selected, you do not need to configure the following settings.)

Proxy Address

Enter the host name or IP address of the proxy server.

Port Number

Enter the port number of the proxy server.
Enter from 0 to 65535. The default is 0.

User Name

Enter the user name used when logging in to the proxy server.
You can enter up to 31 alphanumeric characters.

Password

Click Change to change the password for logging in to the proxy server.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.