LDAP Server (Setup)
Device Management > Configuration > Device Settings >
LDAP Server > LDAP Server (Setup)
Register and update LDAP servers.
Identification Name
Enter the LDAP server's name using up to 20 characters.
Server Name
Enter the LDAP server's host name or IP address using up to 128 characters.
Search Base
Enter the position within the LDAP directory's structure from which to start user searches.
Use up to 128 alphanumeric characters.
Example: dc=my-domain.com
Port Number
Enter the port number used to connect to the LDAP server. Use a number from 1 to 65535. The default is 389.
SSL
Select whether or not to use SSL to communicate with the LDAP server. If you select On, communication between machine and LDAP server is SSL encrypted. If you select Off, communication is not encrypted.
Note
- To apply SSL encryption, a device certificate must be installed in the device.
- This setting is reflected in the Port Number box. When On is selected, Port Number is set to "636", and when Off is selected, Port Number is set to "389".
Authentication
Select to perform authentication when the machine connects to the LDAP server.
Off
No authentication.
Cleartext Authentication
User name and password authentication.
Digest Authentication
User name, password, and device certification authentication.
Kerberos Authentication
User name, password, and device certification authentication.
Note
- Set your user name and password using User Name and Password on this page.
User Name
Enter your LDAP server login user name. Use up to 128 alphanumeric characters.
Note
- If Authentication is set to Digest Authentication or Kerberos Authentication, a user name must be set.
Password
Click Change to update the logged-in user's password.
Note
- If Authentication is set to Digest Authentication or Kerberos Authentication, a password must be set.
Realm Name
If you selected Kerberos Authentication for Authentication, you must specify the Kerberos realm for user authentication.
Note
- The realm name must be preset on the Device Management - Configuration - Device Settings - Program/Change Realm page.
Connection Test
Click Start to see whether or not connection to the LDAP server is possible using the settings configured.
Search Conditions
Specify which items of user information to search for via LDAP search.
Identification Name
Enter an attribute type by which the user name can be distinguished.
Use up to 64 alphanumeric characters.
Default: "cn".
E-mail Address
Enter an attribute type by which the user e-mail address can be distinguished.
Use up to 64 alphanumeric characters.
Default: "mail".
Fax Number
Enter an attribute type by which the user fax number can be distinguished.
Use up to 64 alphanumeric characters.
Default: "facsimileTelephoneNumber".
Company Name
Enter an attribute type by which the user's company (or organization) name can be distinguished.
Use up to 64 alphanumeric characters.
Default: "o".
Department Name
Enter an attribute type by which the user's department name can be distinguished.
Use up to 64 alphanumeric characters.
Default: "ou".
Search Options
Specify other condition for LDAP search, if required. For example, to search for information based on user's employee number, enter "employeeNo" in the Attribute box, and then enter "Employee No." in the Key Display box.
Attribute
Enter an attribute type by which the user can be distinguished. Use up to 64 alphanumeric characters.
Key Display
Enter the name shown on the machine's control panel, which is used for LDAP search to search a user based on the attribute type specified in the Attribute box. Use up to 20 alphanumeric characters.
Buttons
OK
Click to apply the settings.
Cancel
Click to cancel the settings and return to the LDAP Server page.