Paper
Configuration > Device Settings > Paper

Use this page to make settings for paper loaded in paper trays, such as size and type, for each paper tray.

Note

• For the bypass tray, the value set in the [Paper Size] box applies only when using the printer function.
• Settings on this page can be changed by the following Administrators and Users:
  • Machine Administrator
  • Logged-on Users
    User authentication is enabled on the device and Users are permitted to make changes to Administrator's setting items.

Tray Settings

Paper Size

In the [Paper Size] list, select the size of paper loaded in the input tray.
When [Custom] is selected, also select an appropriate option in the [Custom Paper Size] box.

Note

• Available values depend on machine type and paper tray.

Custom Paper Size

Enter the custom paper size when [Custom] is selected.
Enter the length of the paper's short and long edges, in the [Horizontal] and [Vertical] boxes respectively, in the units set on the machine (inch or mm).

Note

• Available paper sizes vary depending on the paper tray. For details about setting the paper size, see the operating instructions provided with the machine.
• This appears only for trays on which [Custom] can be set as the paper size.

Paper Type

Select the paper type in the box.

Note

• Available options vary depending on machine and paper tray.
• This item appears only for paper trays where users can select paper type.

Paper Thickness

Select the paper thickness from the drop down menu.

Note

• Available values depend on machine type and paper tray.
• This item appears only for paper trays where users can select paper type and thickness.
• If you select a paper type other than [Plain Paper] in the [Paper Type] list, the paper type - not the paper thickness - will be displayed for [Input tray] on the [Home (Status)] page.
  For example, if you select [Plain Paper] in the [Paper Type] list and [Thick Paper 1] in the [Paper Thickness] list, [Thick Paper 1] will be displayed. However, if you select [Recycled Paper] in the [Paper Type] list and [Thick paper 1] in the [Paper Thickness] list, [Recycled Paper] will be displayed.

Apply Auto Paper Select

Select to use the tray when Auto Select is chosen as the paper source.
When [On] is selected, the tray is automatically selected according to the job settings.
When [Off] is selected, the tray is not used even if the size and type of paper loaded in the tray matches the job settings. This option can be used to prevent paper loaded in the tray, such as high quality paper and special paper, automatically feeding.

Note

• This item may not appear depending on machine configuration.

Apply Duplex

Select whether to use the tray for duplex printing.
Even if [On] is selected, the tray may not be suitable for duplex printing, depending on the type and thickness of the paper that is loaded in it.

Buttons

[Refresh]

Click to update the currently displayed information.

Note

• Before making the settings, click [Refresh] to obtain the machine's current status.

[OK]

Click to apply the settings.

[Cancel]

Click to cancel the settings.