AppleTalk
Configuration > Network > AppleTalk

Make settings related to AppleTalk.

Note

• Settings made here relate to the following interfaces:
  Ethernet and wireless LAN.
• These settings can be made only when you are logged on as Administrator; otherwise, the machine's current settings for each item are displayed.
• This page appears when the standard AppleTalk module is installed, or when the optional AppleTalk module and the PS option are installed.

AppleTalk

Select whether AppleTalk is active or inactive for the interface board.

Network No.

Displays the AppleTalk Network number. This number is assigned automatically.

Printer Name

Enter the name of the printer to display on Chooser, using up to 32 characters. The symbols such as "*", ":", "=", "@", and characters equivalent to "0xc5" in ASCII code cannot be used.
The name of the printer actually displayed on the active Macintosh Chooser appears in parentheses. Normally, this is the name specified under the [Selected Printer Name] box, but if multiple machines of the same name are configured, it may differ.
When the PostScript Unit is not installed in the printer, Printer Name is not displayed.

Printer Type

Displays the printer's generic type.

Zone Name

Enter the name of the zone to which the interface board belongs. To specify the default zone, enter "*". The name must be entered using up to 32 characters.
The name of the zone, that the active interface board currently belongs to, appears in parentheses.

Buttons

[Refresh]

Click to update the currently displayed information.

Note

• Before making the settings, click [Refresh] to obtain the machine's current status.

[OK]

Click to apply the settings.

[Cancel]

Click to cancel the settings.