Make the necessary settings for sending and receiving e-mail.
Note
Enter the e-mail address of administrator using up to 128 characters. E-mail notification may fail if the item is not specified.
Select whether to receive e-mails, and if yes, select the protocol used for e-mail reception. The default is [POP3].
Specify the interval between e-mail reception server polling. Enter the polling interval in the box below. You can enter a value between 2 and 1440 (min.). The default is 3.
Note
Select whether to leave e-mails on the server after reception. When [Errors only] is selected, only reception error condition e-mails are left on the server. The default is [Off].
Enter the IP address or host name of the SMTP server using up to 127 characters.
Note
Enter the port number used when sending e-mail to the SMTP server. Enter a value between 1 and 65535. The default is 25.
Select whether to log on to the SMTP server using SMTP AUTH when sending e-mail. The default is [Off].
Enter the e-mail address used when [SMTP Auth. Password] is set to "On", using up to 128 alphanumeric characters.
Enter the SMTP account name used when [SMTP Authentication] is set to [On]. To specify the realmID, enter the SMTP authentication user name followed by "@realmID", using up to 191 single-byte (or 95 double-byte) characters.
To set or change the password for SMTP AUTH, click [Change]. When the [Change SMTP Auth. Password] page appears, enter the password to be used.
For details about the [Change SMTP Auth. Password] pageWhen [SMTP Authentication] is set to [On], select whether to encrypt the password or not. Encryption takes place automatically according to the SMTP server setting when [Auto Select] is selected. The default is [Auto Select].
Select whether to log on to the POP3 server before sending e-mail. The default is [Off].
Enter the e-mail address used when [POP before SMTP] is set to [On], using up to 128 alphanumeric characters.
Enter the POP account name used when [POP before SMTP] is set to [On]. Use up to 191 alphanumeric characters.
To set or change the POP password, click [Change]. When the [Change POP Password] page appears, enter the password to be used.
For details about the [Change POP Password] pageWhen [POP before SMTP] is set to [On], enter the time available before connecting to the SMTP server after logging on to the POP server.
The entry range is 0 to 10000 milliseconds. The default is 300.
Enter the e-mail reception server IP address or host name. Specify the POP3 or IMAP4 server according to the protocol selected in the [Reception Protocol] list. Use up to 127 alphanumeric characters.
Note
Select whether to encrypt the password or not when logging on to the e-mail reception server. Encryption takes place automatically according to the server (POP3 or IMAP4) setting when [Auto Select] is selected. The default is [Auto Select].
Enter the port number for accessing the POP3 server. You can enter a value between 1 and 65535. The default is 110.
Enter the port number for accessing the IMAP4 server. You can enter a value between 1 and 65535. The default is 143.
Enter the e-mail address of the device, using up to 128 alphanumeric characters.
This address must be entered to allow users to identify the e-mail sender.
Select whether to use the Receive E-mail Notification function. If you select [On], replies are sent to request e-mail received from users. The default is [Off]: no reply is sent to request e-mail received from users.
Enter the administrator's name as the Notification E-mail sender (using up to 191 alphanumeric characters).
Set or change your E-mail Notification password by clicking the [Change] button. When the [Change E-mail Notification Password] page appears, enter the password you want to set.
For details about the [Change E-mail Notification Password] pageClick to update the currently displayed information.
Note
Click to apply the settings.
Click to cancel the settings.
Click to return to the [Configuration] page.
Note