Timer
Configuration > Device Settings > Timer

Make settings to control the functions supported by the machine.

Note

• These settings can be made only when you are logged on as Administrator; otherwise, the machine's current settings for each item are displayed.

Energy Saver Mode

Select this to force the machine to automatically switch to Energy Saver Mode if it remains inactive for a specified wait period.
If you select [On], you must then specify a wait period in the [Energy Saver Mode Timer] box.

Energy Saver Mode Timer

Select the number of minutes the printer waits before it switches to Energy Saver Mode. This setting is available only if you selected [On] in the [Energy Saver Mode] box.

Auto Reset Timer

Select whether to reset the device's printer settings to their initial status (as when first turned on), when the printer function is idle for a specified period.
When [On] is selected, enter the time before reset to initial status. Enter a value between 10 and 999 (seconds).
When [Off] is selected, device settings remain until turned off.

Buttons

[Refresh]

Click to update the currently displayed information.

Note

• Before making the settings, click [Refresh] to obtain the machine's current status.

[OK]

Click to apply the settings.

[Cancel]

Click to cancel the settings.

[Back]

Click to return to the [Configuration] page.

Note

• The [Back] button is available only before you log on.