Scan Settings
Configuration > Scanner >
Scan Settings
Configure the default settings used for scanning originals.
Note
- Settings on this page can be changed by the following Administrators and Users:
- Machine Administrator
- Users logged on to a device that is set to perform user authentication
Users must have normal scanner operation rights and permission to change settings that usually only administrators can change.
A.C.S. Sensitivity Level
Sets the sensitivity level for detecting color/black and white when scanning originals.
Wait Time for Next Original(s)
Exposure Glass
To divide originals and scan them separately into a single file using the exposure glass, specify [Continuous Wait], [Off], or [Set Wait Time] for the waiting status.
Continuous Wait
The machine will wait for additional originals until the [#] key is pressed. Scanning begins as soon as any additional originals are placed and the [Start] key is pressed. You can end scanning and begin sending by pressing the [#] key.
Off
The machine does not wait for additional originals and begins sending as soon as each original is scanned.
Set Wait Time
Using the number keys, specify the time (3 to 999 seconds) that the machine waits for additional originals. Scanning begins as soon as any additional originals are placed and the [Start] key is pressed. During this time, you can end scanning and begin sending by pressing the [#] key. When the specified time elapses, the scanned files are automatically sent.
SADF
To divide originals and scan them separately into a single file using the ADF, specify [Set Wait Time] or [Continuous Wait] for the waiting status.
Note
- This setting is available only on machines that are equipped with the Auto Document Feeder.
Continuous Wait
The machine will wait for additional originals until the [#] key is pressed. Scanning begins as soon as any additional originals are placed and the [Start] key is pressed. You can end scanning and begin sending by pressing the [#] key.
Set Wait Time
Using the number keys, specify the time (3 to 999 seconds) that the machine waits for additional originals. Scanning begins automatically if additional originals are placed within this time. During this time, you can end scanning and begin sending by pressing the [#] key. When the specified time elapses, the scanned files are automatically sent.
Background Density of ADS (Full Color)
Adjusting the background density can reduce excessive grayness and shading, which can appear on scans if the original is a newspaper or other semi-transparent media.
Buttons
[Refresh]
Click to update the currently displayed information.
Note
- Before making the settings, click [Refresh] to obtain the machine's current status.
[OK]
Click to apply the settings.
[Cancel]
Click to cancel the settings.