User Authentication Management (LDAP Authentication)
Configuration > Device Settings >
User Authentication Management > User Authentication Management (LDAP Authentication)
Use this page to make settings for LDAP Authentication.
Note
- The LDAP server and machine are connected on the same network, but to perform LDAP authentication, the LDAP server must be registered on the machine. To register the LDAP server, use the [Configuration: Device Settings: LDAP Server] page.
Printer Job Authentication
Make settings for processing printer jobs under each authentication method.
Note
- The setting made here is for Basic Authentication, Windows Authentication, LDAP Authentication, and Integration Server Authentication.
Printer Job Authentication
Select whether to print a job if the printer driver sending the job contains no authentication information (i.e. no user name or password).
Entire
The job is not printed if it has no authentication information.
Simple (All)
The job is printed even if it has no authentication information.
Simple (Limitation)
Authentication-based print is determined by settings made under the following: [Limitation Range (IPv4)], [Limitation Range (IPv6)], [Parallel Interface (Simple)], and [USB (Simple)].
Limitation Range (IPv4)
Enter a range for limiting unauthenticated print jobs from IPv4 addresses.
You can set up to five ranges.
Any job sent from an IPv4 address within the range entered here is printed, regardless of whether or not it is authenticated.
Any unauthenticated job sent from an IPv4 address outside the entered range is not printed.
Note
- This setting is only possible if [Printer Job Authentication] is set to "Simple (Limitation)".
Limitation Range (IPv6)
Enter a range for limiting unauthenticated print jobs from IPv6 addresses.
Enter the range using a combination of start and end addresses or a combination of base address and mask.
You can set up to five ranges.
Any job sent from an IPv6 address within the range entered here is printed, regardless of whether or not it is authenticated.
Any unauthenticated job sent from an IPv6 address outside the entered range is not printed.
Note
- Use one of the following procedures to specify the range:
- Select [Range], and then enter the start and end addresses.
- Select [Mask], enter the base address, and then enter the mask between 1 and 128 in the [Mask Length].
- This setting is only possible if [Printer Job Authentication] is set to "Simple (Limitation)".
Parallel Interface (Simple)
Select whether or not to apply authentication-based print to jobs sent using the parallel interface.
"Apply": unauthenticated jobs are not printed.
"Do not Apply": unauthenticated jobs are printed.
Note
- This setting is only possible if [Printer Job Authentication] is set to "Simple (Limitation)".
USB (Simple)
Select whether or not to apply authentication-based print to jobs sent using the USB interface.
"Apply": unauthenticated jobs are not printed.
"Do not Apply": unauthenticated jobs are printed.
Note
- This setting is only possible if [Printer Job Authentication] is set to "Simple (Limitation)".
LDAP Authentication Settings
LDAP Authentication
Select the LDAP server used for User Authentication.
Login Name Attribute
Enter the login name attribute (user name attribute), using up to 32 alphanumeric characters.
A typical attribute may be "cn" or "uid".
When the data of the LDAP-authenticated user is automatically registered to the Address Book on the device, information is searched for the user's e-mail address and other data for the Address Book.
The search filter for finding the data is created using the login name (user name) used for authenticating the user.
The login name attribute specified here is used as data for creating this search filter.
Unique Attribute
Enter the attribute for uniquely identifying the user, using up to 32 alphanumeric characters.
When the data of the LDAP-authenticated user is automatically registered to the Address Book, this attribute information can also be registered. This unique attribute is used for identifying the user at the subsequent authentication.
Available Function
Select the function(s) for which User Authentication is required:
Copier: Black & White
Select whether User Authentication is required for black and white copying.
Printer: Black & White
Select whether User Authentication is required for black and white printing.
Other Function(s): Document Server
Select whether User Authentication is required for Document Server operations.
Other Function(s): Fax
Select whether User Authentication is required for fax functions.
Other Function(s): Scanner
Select whether User Authentication is required for scanner functions.
Buttons
[Refresh]
Click to update the currently displayed information.
Note
- Before making the settings, click [Refresh] to obtain the machine's current status.
[OK]
Click to apply the settings.
[Cancel]
Click to cancel the settings.