NetWare
Configuration > Network >
NetWare
Use this page to make settings for printing using NetWare.
Note
- Settings made here relate to Ethernet.
- Settings on this page can be changed by the following Administrators and Users:
- Network Administrator
- Logged-in Users
User authentication is enabled on the device and Users are permitted to make changes to Administrator's setting items.
- This page appears when a NetWare module (standard or optional) is installed.
NetWare
Select whether NetWare printing for the interface board is active or inactive.
NetWare Print Settings
Logon Mode
Select whether to specify the file server or the NDS tree when logging on using NetWare.
File Server Mode
Connects to the file server specified in the [File Server Name] box.
NDS Mode
Connects to the server within the NDS tree specified in the [NDS Tree] box.
File Server Name
Enter the File Server name to search for, using up to 47 characters. You have to enter this.
NDS Tree
Enter the name of the NDS tree you want to log on to when using NDS mode, using up to 32 characters.
Frame Type
In the list, select the frame type to be used. "Auto Select" selects the frame type detected on startup. Therefore, the required frame type may not be set when multiple frame types are selectable. When this is the case, select the frame type here.
NCP Delivery
NCP Delivery Protocol
Select the protocol for NCP delivery.
IPX Priority
Gives priority to IPX. If IPX is unavailable, IPv4 is used.
IPv4 Priority
Gives priority to IPv4. If IPv4 is unavailable, IPX is used.
IPX Only
Uses IPX only.
IPv4 Only
Uses IPv4 only.
Note
- You cannot use IPX if the NetWare protocol is disabled.
- You cannot use IPv4 if the IPv4 protocol is disabled.
- IPv6 is not supported.
Buttons
[Refresh]
Click to update the currently displayed information.
Note
- Before making the settings, click [Refresh] to obtain the machine's current status.
[OK]
Click to apply the settings.
[Cancel]
Click to cancel the settings.