NetWare

Use this page to make settings for printing using NetWare.

Note

Settings made here relate to the following interfaces:
Ethernet and wireless LAN (IEEE 802.11b).
Settings on this page can be changed by the following Administrator:
- Network Administrator

NetWare

Select whether to enable or disable NetWare printing for the interface board.

NetWare Print Settings

Print Server Name

Enter the name of the NetWare print server using up to 47 characters. If you use the interface board as a print server, enter the name of a print server that is not in use in the file server.

Logon Mode

Select whether to specify the file server or the NDS tree when logging on using NetWare.

File Server Mode

Connects to the file server specified in the [File Server Name] box.

NDS Mode

Connects to the server within the NDS tree specified in the [NDS Tree] box.

File Server Name

Enter the File Server name to search for, using up to 47 characters. You have to enter this.

NDS Tree

Enter the name of the NDS tree you want to log on to when using NDS mode, using up to 32 characters.

NDS Context Name

Enter the context of the print server when using NDS mode. You can enter up to 127 characters.
Object names must be input from a lower level and separated by a period. For example, if you want to create the file server in NETWORK under DS, enter "NETWORK.DS".

Operation Mode

Select whether to use the interface board as a print server, or as a remote printer.

Remote Printer No.

Enter the printer number. Use the same number as that of the printer to be created on the print server. The entry range is 0 to 254.

Job Timeout

Because a printer acting as NetWare environment remote printer cannot detect the end of a job, it waits for a certain amount of time after printing. When this period elapses without additional print information received, it considers the job completed. The set time is displayed here. The time is measured in seconds. The range is 3 to 255 seconds. The default is 15.

Frame Type

In the list, select the frame type to be used. "Auto Select" selects the frame type detected on startup. Therefore, the required frame type may not be set when multiple frame types are selectable. When this is the case, select the frame type here.

Print Server Protocol

In the list, select the protocol used with NetWare.

Buttons

[Refresh]

Click to update the currently displayed information.