Interface Settings
Configuration > Interface >
Interface Settings
Use this page to enter administrative information related to the machine's interfaces.
Some items are for reference only and cannot be changed.
To make settings for the wireless LAN (IEEE 802.11b) board, use the [Wireless LAN Settings] page.
Note
- Settings on this page can be changed by the following Administrators:
- Network Administrator (Change Interface, Ethernet, and Bluetooth)
- Machine Administrator (USB, USB Host, and PictBridge)
Change Interface
Switch the interface between Ethernet and wireless LAN (IEEE 802.11b). This is available only if the device supports both interfaces.
Note
- When "Ethernet" is in use, the switching option is not available.
Ethernet
![[To Top]](img/item_title_head.gif)
Displays network interface board information. This information appears when a network interface board is installed.
Network
Displays Ethernet operation status.
MAC Address
Displays the MAC address (Media Access Control Address) of the network interface board.
Bluetooth
Configure settings related to the Bluetooth board. This information appears when a Bluetooth board is installed.
Bluetooth
Select to enable or disable communication using Bluetooth.
Operation Mode
Select the Bluetooth operation mode.
Public
You can establish the connection by searching for a Bluetooth adaptor or Bluetooth-equipped computer.
Private
You can establish the connection when registering the machine with utility. A Bluetooth adaptor or Bluetooth-equipped computer that has not registered the machine cannot be searched for.
USB
Configure USB settings.
USB
Select to enable or disable data transfer via USB.
USB Host
This appears when data transfer via USB is enabled and the device supports PictBridge.
USB Host
When the digital camera connected to the device's USB port is ready for data transfer, [Enable] is displayed.
PictBridge
Configure PictBridge settings.
PictBridge is the standard that enables images to be printed by connecting a device directly to a digital camera via USB cable.
The following item appears when the device supports PictBridge:
PictBridge
Select to enable or disable communication using PictBridge.
Buttons
[Refresh]
Click to update the currently displayed information.
Note
- Before making the settings, click [Refresh] to obtain the machine's current status.
[OK]
Click to apply the settings.
[Cancel]
Click to cancel the settings.