Previous
Use the "netware" command to view and configure the NetWare settings such as the print server name or file server name. The following commands are available only when an optional NetWare unit is installed.
NetWare Print Server Names
msh> netware pname "character string"
Enter the NetWare print server name up to 47 characters.
NetWare File Server Names
msh> netware fname "character string"
Enter the NetWare file server name up to 47 characters.
Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
Remote Printer Number
msh> netware rnum [0–254]
The default is 0.
Timeout
msh> netware timeout [3–255]
The default is 15.
Print server mode
msh> netware mode pserver
msh> netware mode ps
Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
NDS context name
msh> netware context "character string"
SAP interval
msh> netware sap_interval [0–3600]
It can be entered between 0 and 3600 seconds.
Setting login mode for file server
msh> netware login server
Setting login mode for NDS tree
msh> netware login tree
Setting login mode for NDS tree name
msh> netware tree "NDS tree name"
File transfer protocol
msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}
If you do not specify the protocol, the current setting is displayed.
Protocol |
Set Protocol |
|---|---|
ipv4pri |
IPv4+IPX(IPv4) |
ipxpri |
IPv4+IPX(IPX) |
ipv4 |
IPv4 |
ipx |
IPX |
