Skip header
 

Connecting to the Interface

This section explains how to identify the machine's interface and connect the machine according to the network environment.

CAUTION


  • A network interface cable with a ferrite core must be used for RF interference suppression.

Connecting to the interfaces illustration numbered callout illustration

  1. USB Host Interface

    Port for connecting a USB interface cable or USB interface device

    Use this interface to connect the machine to a card authentication device, external keyboard, or Bluetooth.

  2. USB 2.0 [Type B] port

    Port for connecting a USB2.0 [Type B] interface cable

    This interface allows the machine to print over USB connection.

  3. Gigabit Ethernet port

    Port for using a 1000BASE-T, 100BASE-TX, or 10BASE-T cable

    Use this interface to connect the machine to a network.

    If you use an Ethernet interface cable that supports 1000BASE-T, set [Ethernet Speed] to [Auto Select: Enable 1Gbps] in [Interface Settings] in [System Settings].

  4. Slot B

    Install the optional wireless LAN interface unit here.

    The wireless LAN interface unit is required if you want to connect this machine to a wireless LAN. When installed in Slot B, this unit allows you to connect the machine to an IEEE 802.11 a/b/g/n wireless LAN.

Note

  • The Gigabit Ethernet port and Wireless LAN interface unit cannot be used simultaneously. If the optional Wireless LAN interface unit is installed, you need to set [LAN Type] to [Wireless LAN] in [Interface Settings] in [System Settings].

  • The Bluetooth interface unit and the Wireless LAN interface unit cannot be used simultaneously.