Skip header
 

Specifications for Wireless LAN Board

Important

  • Note that the available channels (frequency ranges) and locations to use the wireless LAN are subject to the regulations of the country or region where the printer is used. Be sure to use the wireless LAN according to the applicable regulations.

Transmission spec.:

Based on IEEE 802.11a/b/g/n (wireless LAN)

Protocol:

TCP/IP, IPX/SPX

Transmission Rate:

1–300 Mbps

Frequency range (Center Frequency):

  • 2412–2462 MHz (1–11 channels)

  • 5180–5320 MHz (36, 40, 44, 48, 52, 56, 60, and 64 channels)

  • 5500–5700MHz (100, 104, 108, 112, 116, 120, 124, 128, 132, 136 and 140 channels)

Ad-hoc mode Channel Frequency range (Center Frequency):

  • 2412–2462 MHz (1–11 channels)

  • 5180–5240 MHz (36, 40, 44, and 48 channels)

Transmission mode:

  • Ad hoc mode

  • Infrastructure mode

Note

  • Web Image Monitor is supported.

  • A transmission rate of 300 Mbps is a theoretical value of the wireless LAN specification.

  • The maximum transmission rate in the ad-hoc mode is 54 Mbps for IEEE802.11a and 11 Mbps for IEEE802.11b. The Ad-hoc communication is not supported in an IEEE802.11g/n environment.

  • The channel in use might differ depending on the country.