Skip header
 

ID Card Copy

This section describes how to copy the front and back sides of an ID card, or other small original, onto one side of a sheet of paper.

Illustration of ID Card Copy

  1. Front

  2. Back

Important

  • The Duplex function cannot be used with this function. If [1 sided 2 sided:TtoT] is selected, cancel the setting.

This function copies the original on to the top and bottom halves of Landscape paper. For example, when copying onto an A4 (81/2 × 11)Landscape size sheet of paper, the front of the original is copied onto the top half of the paper in a space the same as A5 (51/2 × 81/2)Portrait and the back of the original is copied onto the bottom half. Place the original in the center of the scanning area when using this function.

We recommend that you use A4Landscape or 81/2 × 11Landscape size paper with this function.

1Press [ID Card Copy].

Operation panel screen illustration

2Select the paper tray.

3Place the original front side down on the exposure glass.

When copying onto A4 (81/2 × 11)Landscape size paper

Place the original in Portrait orientation and in the center of the A5 (51/2 × 81/2)Portrait scan area.

Illustration of ID Card Copy

4Press the [Start] key.

5Place the original back side down on the exposure glass, and then press the [Start] key again.

Note

  • If you press [ID Card Copy] after specifying the reproduction ratio, the reproduction ratio is canceled.

PreviousNext