Skip header
 

Auto Reduce / Enlarge

The machine automatically calculates the reproduction ratio based on the sizes of the originals and the paper you have specified. The machine will rotate, enlarge, or reduce the image of the originals to fit them to the paper.

Illustration of Auto Reduce / Enlarge

Important

  • You cannot use the bypass tray with this function.

  • If you select a reproduction ratio after pressing [Auto Reduce / Enlarge], [Auto Reduce / Enlarge] is canceled and the image cannot be rotated automatically.

This is useful to copy different size originals to the same size paper.

If the orientation in which your original is placed is different from that of the paper you are copying onto, the machine rotates the original image by 90 degrees and fits it on the copy paper (Rotate Copy). For details about Rotate Copy, see Rotate Copy.

1Press [Original Settng].

Operation panel screen illustration

2Press [Original Size].

3Specify the original size, and then press [OK].

4Select original orientation.

Operation panel screen illustration

5Press [OK].

6Press [Auto Reduce / Enlarge].

7Select the paper tray.

8Place the originals, and then press the [Start] key.

Note

  • To copy A5Portrait originals onto A5Landscape at 100%, select the paper tray that contains A5Landscape, and then select [Auto Reduce / Enlarge]. The machine rotates the original image by 90 degrees.

  • For details about the base point, see Reducing or Enlarging Originals.

Related topics

Rotate Copy