Previous
Paper that has a horizontal length of 127.0–355.6 mm (5.00–14.00 inches) and a vertical length of 70.0–216.0 mm (2.76–8.50 inches) can be fed in from the bypass tray. Note however that the limitation on the horizontal and vertical length range will vary depending on which options are installed.
When prints are delivered to Internal tray 1, Internal tray 2, or the finisher shift tray:
Horizontal length: 127.0–355.6 mm (5.00–14.00 inches), vertical length: 70.0–216.0 mm (2.76–8.50 inches)
When prints are delivered to the right tray:
Horizontal length: 148.0–355.6 mm (5.83–14.00 inches), vertical length: 70.0–216.0 mm (2.76–8.50 inches)
Load the paper face down in the bypass tray.
The bypass tray (
) is automatically selected.
Press the [
] key.
Press [Paper Size].
Press [Custom Size].
Enter the horizontal size with the number keys, and then press [].
Enter the vertical size with the number keys, and then press [].
Press [OK] twice.
Place the originals, and then press the [Start] key.
You can register a custom paper size. For details, see Registering a custom size. You can also recall the registered custom paper size. For details, see Recalling the registered custom size.
